TLR suspension mounts FR RR

[BashingBrian]

Question about the pill adjustment and the TLR manual doesn't really explain what I need to know..

I want to run maximum anti squat with minimum toe in, is this possible ??? I'm experimenting with a setup on a project car not a Typhon.

Below is the Arrma manual page showing the rear pill adjustments, maybe I'm having a blonde moment but from how I read it, what I want is not possible..!!

Anyone out there with this knowledge please come forward, Thx
Tagged a few of the people who I think maybe able to help @razorrc @SrC @gotnitro

 

[Yonic]

Why not possible? These are unrelated adjustments. The anti squat adjustment is up/down movement. The toe is left/right

 

[Yonic]

You want to set it up this way

 

[3x9rtse]

As Yonic shows , "C" block up and out , and the "D" block down and in .
Not shown in the manual that are included are these . The "dot" is 1/2 degree , the "slash" is 1 degree . The 4 bottom ones are what you need for what you are saying you want to do . This combination will give you a total of 4 degrees of anti-squat , and 1 degree of toe .
Remember what these things do , anti squat is for the back of the truck to not drop and cause more forward bite / movement , but on jumps can cause more " buck up " . Usually applied on high traction conditions .
Less toe , also used for high traction surfaces . This also affects corner entry / corner exit speeds .

 

[BashingBrian]

Awesome, thanks for explaining that up for me..

Using your bottom 4 pills I'm guessing I put the dot in the furthest corner top on the RF and the RR goes bottom inner??

 

[Yonic]

Using your bottom 4 pills I'm guessing I put the dot in the furthest corner top on the RF and the RR goes bottom inner??

Exactly

 

[Garcbomber]

Is there a vendor where I can order just the rear RF/RR pills/blocks?

 

[Yonic]

Yes, you can order them directly from arrma or horizon or amain.
You need also the pins:
https://www.amainhobbies.com/arrma-...uspension-mount-rear-front-ara320655/p1357639
https://www.amainhobbies.com/arrma-...spension-mount-rear-rear-ara320656/p1357640?1
https://www.amainhobbies.com/arrma-4x67.5mm-lower-hinge-pin-2-ara330381/p409516
https://www.amainhobbies.com/arrma-lower-arm-adjustment-block-set-ara320658/p1357642

 

[BashingBrian]

Got my parts from a local kit breaker