Any other Mojave exb owners having this problem? Not enough clearance between rear hubs and rims.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
My bearings are fine. The clearance issue was out of the box. I noticed it when I did inspection after unboxing. The damage is after 3 runs.
Don you think your tires would be shot before the wheels are so damaged you can't use them?
I'm saying the damage to the inside of the wheels is inconsequential considering you will need new tires from just normal wear and tear before the wheel damage becomes an issue.You mean like foam fiddlesticked up ?
Maybe.
Then Arrma Warranty maybe is legal use ?
Very Bad glued wheels from start ?
Have you done self vent holes ? then you are in need buy new things
I'm saying the damage to the inside of the wheels is inconsequential considering you will need new tires from just normal wear and tear before the wheel damage becomes an issue.
Ok.
cool
i newer use warranty. I change to XT90 connectors always anyway.
I believe also that EXB RIGS is very hard use waranty issues ?
This is one extreme Rig.
I have mount Max6 combo to my brother. When everything brand new.
I did check alot things before this rig left ground.
Wheel Balance and alot more.
If one wheel does wobbling, then you can make it by Warranty.
After you drive it ones. you don't have anything.
Important =
Check everything before you run it.
don't trust nobody.
I’m not sure what you mean... my biggest concern is the hubs grinding away. I’m not happy with the rim damage either ?Don you think your tires would be shot before the wheels are so damaged you can't use them?
Jeez I missed that part ? My bad. Honestly I'd just run it if/until the huns fail and then just warranty the hubs and the wheels. Or get the HR hubs which is probably their best product.I’m not sure what you mean... my biggest concern is the hubs grinding away. I’m not happy with the rim damage either ?
Yep, contacted HH yesterday. I’m waiting for them to get back to me. I’m considering trying M2c hex extenders. I’m also thinking Santa ?? is bringing me Vitavon hubs.Jeez I missed that part ? My bad. Honestly I'd just run it if/until the huns fail and then just warranty the hubs and the wheels. Or get the HR hubs which is probably their best product.
Just been busy and I was at the RC thing for almost 3 years straight. Spent probably close to $20,000 and that's not an exaggeration ? I just needed a break for a bit plus the forum can be a bit much at times. Some people don't embrace my brutal honesty and I tend to call it as I see it ? But this is a great resource that has helped me tremendously in the past. Much to some people's displeasure (and desire), I'm not going away for good ?Yep, contacted HH yesterday. I’m waiting for them to get back to me. I’m considering trying M2c hex extenders. I’m also thinking Santa ?? is bringing me Vitavon hubs.
BTW... Where you been?
Problem is dirt sticking inside the wheel. In ”right” conditions it happens also in front. But rear is worse.Goddammmm
What is the issue then? if not bearings ?=
I have ever so slight rubbing with stockers but not any issue to write home about. And I like my Truggy wheels better for bashing. And it just cant rub anymore, which is a plus. But the stockers never tore up my hubs as you can see in the pictures. I only run mine on 6S. Maybe on 8S would be make it worse. IDK ?Holy poop guys.
This looks bad, Horror pictures.
What the hell is this?
Im sitting here with my brother now. He have EXB Mojave. He have been driving it 15-17 runs 7000mah packs. Both 6s and 8s Max-6 Combo.
Rims look like new still inside and hubs also both front and rear. We both check this minute ago.
He need new Tires only . New wheel set up
We bash hard. We send our rigs pretty well.
Have you bad bearings ?
^^^ In the above picture directly above^^^ What is that threaded hole doing in your hub????? What purpose could that possibly be for? ?Problem is dirt sticking inside the wheel. In ”right” conditions it happens also in front. But rear is worse.View attachment 114642View attachment 114643
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!