Mestizo_rc
Active Member
- Messages
- 35
- Reaction score
- 74
- Location
- Syracuse NY
- Arrma RC's
- Kraton 8S
- Kraton 6s
- Kraton EXB
- Notorious
- Outcast 6s
- Outcast 8s
- Outcast EXB
- Talion
- Talion EXB
- Typhon 3s
- Typhon 6s
- Typhon TLR
There's lots of info and help on this forum and I may have a little success story. We all at some point were new or beginners in this hobby. I started (Hobby grade) in Nov of 2022. So very new to this. While youtube helps I've found better success and information here on this forum and my build or literary doubling the price of a stock 3s trying to look cool or get parts I didn't need let's start with the very basics.
1# Tires.
2# metal differentials w/ inputs Front and Rear(Kraton 4s)
3 #Servo( kraton 4s)
4# composite links( for the jumpers) ie me.
5# suspension (Outcast 4s) TLR 45wt/610cst shorten shock travel 17mm rear 6mm front.front springs in the rear with preload stiff 7.65lbs spring in the front.
6# 3d printed motor mount. Etc etc..... basics.
I did mod somethings like spacers for all 4 shocks. Extended the hardware was stripping out the holes with the force of the shocks so fixed that problem too.
1# Tires.
2# metal differentials w/ inputs Front and Rear(Kraton 4s)
3 #Servo( kraton 4s)
4# composite links( for the jumpers) ie me.
5# suspension (Outcast 4s) TLR 45wt/610cst shorten shock travel 17mm rear 6mm front.front springs in the rear with preload stiff 7.65lbs spring in the front.
6# 3d printed motor mount. Etc etc..... basics.
I did mod somethings like spacers for all 4 shocks. Extended the hardware was stripping out the holes with the force of the shocks so fixed that problem too.