What is the right antenna length for SR6110AT?

[dure16]

Can someone please measure the antenna wire on their SR6110AT receiver?

Looking for total length and the exposed length (where the rubber is stripped away).

Thanks!

 

[Smilinbri]

I don't have that one, but I have the SLR300 in my spare parts drawer and the antenna from the box all the way out us 5 1/8" and the length of the bare wire is 1 1/4".

In comparison, the RL R7FG is 8 1/4" long and bare wire the same....1 1/4"

Hope this helps!

 

[AIan]

31.25mm exposed core wire for 2.4ghz


edit: it should be 31.25mm I’m s4y for the typo I looked it up to be sure. I fixed the post

 

[LicketySplit]

For what it’s worth the total length doesn’t matter. The exposed portion, or the radiating element, of 2.4ghz is 31.25mm. That’s 1/4 wavelength.

 

[parcou]

Can someone please measure the antenna wire on their SR6110AT receiver?

Looking for total length and the exposed length (where the rubber is stripped away).

Thanks!

I have a few of those in my rigs since I put an AVC in all of them. What your goal what are you trying to do?

 

[dure16]

I have a few of those in my rigs since I put an AVC in all of them. What your goal what are you trying to do?

Wire ripped off and I need to replace it.

 

[LicketySplit]

Wire ripped off and I need to replace it.

Those receivers should have an u.FL (ipex) connector. Just order a 15cm one off Amazon, eBay, etc for around $2 a piece. It’ll work fine. You can go longer if you want but 15cm is a pretty standard stock rx antenna length.

 

[AIan]

+1 yup
Something like these should work
https://www.ebay.com/itm/3937444733...ghY6pPAG7zVm4GDU9GV0MqSt470rdRtcaAr10EALw_wcB