Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I’ve always been skeptical of that rating, the bullets are too small. I’ve replaced EC/IC5 connectors that had heat issues before and solved the problem with XT90’s which have roughly the same size bullets and are rated at 90 amps continuous. Just my personal experience, but I always seem to have more heat issues with EC5’s on 6s.EC5 if soldered perfectly can handle 120amp C/200amp burst.
Rude and unnecessary.ESL and mentally handicapped, a great combination.
But the crap he was saying to me was normal and necessary?I’ve always been skeptical of that rating, the bullets are too small. I’ve replaced EC/IC5 connectors that had heat issues before and solved the problem with XT90’s which have roughly the same size bullets and are rated at 90 amps continuous. Just my personal experience, but I always seem to have more heat issues with EC5’s on 6s.
Rude and unnecessary.
This was slightly over the line my guy, and fwiw he has apologized twice for a silly spat over a battery connector. Just let it go.But the crap he was saying to me was normal and necessary?
+!!Qs10 u don’t need them unless u plan on running 200mph. I use xt90 anti spark for 6s and under. 8s and above I use qs8. I would use qs10 for like 12s. But they r great connectors. Expensive but if u want the best gotta pay for it. U get what u pay for literally imo.
I will admit that the EC5/IC5's have slightly larger diameter Bullets. A plus with 8s setups. HH is all in with their proprietary EC5/IC5 patent there. Hence used with all their RTR stuff.Arrma obviously went through neccesary testing to develop the 8S rigs, which come standard with dual EC5 series to a 160Amp continuous speed controller for a 30 pound rig... Which is now carrying over to the Firma V2.
True that. The EC5 connector I referenced earlier for heat issues was on a Max 6 on a used Mojave I bought. It could have easily been a crappy soldering job, but I never looked at the joints, I just snipped it off and put on an XT90 because I haveArrma obviously went through neccesary testing to develop the 8S rigs, which come standard with dual EC5 series to a 160Amp continuous speed controller for a 30 pound rig... Which is now carrying over to the Firma V2.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!