- Messages
- 1,682
- Reaction score
- 2,058
- Location
- UK
- Arrma RC's
- Felony
- Mojave EXB
- Notorious
- Outcast 6s
- Typhon 3s
I recently assembled a new Notorious body. When ordering the parts, I noticed there were specific M4 screws that are used on the top of the roll hoop that create sparks if you're skating upside down
These are double socket screws with a 2.5mm hex button head, a 2mm hex at the tip and are 10mm in length
What I figured out is you can use these as droop screws instead of the stock grub screws to help stop the ears of the chassis getting dug out. I know M2C and Avid sell identical ones, but you can readily get them off of the Outcast and Notorious bodies instead, or as an Arrma part!
Part no. AR727410
These are double socket screws with a 2.5mm hex button head, a 2mm hex at the tip and are 10mm in length
What I figured out is you can use these as droop screws instead of the stock grub screws to help stop the ears of the chassis getting dug out. I know M2C and Avid sell identical ones, but you can readily get them off of the Outcast and Notorious bodies instead, or as an Arrma part!
Part no. AR727410
Last edited: