Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I would not shave/trim that plastic Double Shear mount at the tower, or force it in place. I would file the side flanges on the balls to make it fit there . You are putting on an after market part that is a tad bit too wide. Why mod the chassis to accommodate the part. Should be the other way a round. IMHO.Mine were very tight. Had to go in perfectly straight. I took a small file and angled the plastic mount just a little to help guide it in.
What is the difference between the ones in the top of the hot racing bag compared to the bottom section? Is the top just smaller ones?I've been trying to fit the pivot ball set into my BR for about a hour and the HR pivot ball seem larger than stock. Any trick into getting them to fit? Especially where it attaches by the diff set. Thanks
View attachment 209653
View attachment 209654
The ones in the top portion are for the shocks. The bottom portion of the bag are for the adjustable links.What is the difference between the ones in the top of the hot racing bag compared to the bottom section? Is the top just smaller ones?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!