Share your tips and upgrades on your notorious
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
For sure you have an amazing rig. But imo most of that isn't needed off the bat. I will admit @3d-rc.myshopify.com wing mount is awesome but I disagree with all you listed is needed to start with.Oh we're to start M2C chassis, full m2c hinge pin blocks and pins front, back and front upper, m2c Ackerman, m2c towers, m2c skid plates, m2c standoffs, CRCU chassis braces, HR bulkheads front and rear, HR servo mount, HR pillar ball retainers, RPM A arms, @3d-rc.myshopify.com wing mount in blue, EXB chassis brace spacers, Tbone front bumper, Dumbo x6f and Max6 ESC. Think that's everything For sure one of my favorites rigs and is an absolute beast View attachment 165512View attachment 165513View attachment 165514View attachment 165515View attachment 165516
https://www.instagram.com/reel/CS3SReeFSQC/?utm_medium=copy_link
Didn't think the post was "list what upgrades are best to start with" it's "Notorious tips and upgrades" and he asked us to share our tips and upgrades so I did.... Not sure what you think I was supposed to post and you can disagree all you want but my rig will take 5x the bashing a stock rig can definitely far from a newby rig more so an advanced basher rigFor sure you have an amazing rig. But imo most of that isn't needed off the bat. I will admit @3d-rc.myshopify.com wing mount is awesome but I disagree with all you listed is needed to start with.
I thought ur post was pretty cool. It shows what type of up grades are out there. ThanksDidn't think the post was "list what upgrades are best to start with" it's "Notorious tips and upgrades" and he asked us to share our tips and upgrades so I did.... Not sure what you think I was supposed to post and you can disagree all you want but my rig will take 5x the bashing a stock rig can definitely far from a newby rig more so an advanced basher rig
Thank you! Ya figured I'd list and show my beast as you can't get a whole lot more upgrades than mine has. Think what upgraded hubs, motor mount and diff cover, titanium tie rods and top plate are about it I don't have lol. But if your going to go big and bash hard it's worth the investment for sure. Now if I break stuff it's usually small stuff like shock standoffs or maybe an A arm on a really bad landing which is like $5 to replace either. Nice to know and be comfortable sending your rig as high and far as you want without worrying about breaking or bending 5 parts at a time like a stock setup and landing on all 4.I thought ur post was pretty cool. It shows what type of up grades are out there. Thanks
Nice rig brother how are the tekno shocks?Doing upgrades to these things is a pretty deep rabbit hole to get into. My Outcast is about like @Edough13 Notorious.
Voltage Hobbies servo mount.
Voltage Hobbies front shock tower.
Savox SB-2273SG servo.
M2C Racing chassis.
M2C Racing rear shock tower.
M2C Racing rear shock tower brace.
M2C Racing rear skid plate.
3d-rc.myshopify.com wing mount.
Rpm a arms all around.
Rpm mud guards.
Rpm front bumper.
Hot Racing gearbox cases.
Hot Racing diff cups.
Hot Racing chassis braces.
PPS-RC motor mount.
Tekno shocks.
Tekno shock mounts.
Tekno orange springs.
Hobbywing Max6 esc.
Hobbywing 4985 1650 motor.
Mr.Duke custom motor fan mount.
Trackstar 30mm aluminum fans.
Probody.RC unbreakable Outcast body.
Darkside studios Pyro body wrap.
Corally Dementor wheels and tires.
GPM front CVDs.
Arrma T2T brace with carbon fiber rod over the top.
And I think that is about it.
Literally the only things that are still original from when I bought the truck in 2017 are the rear outer hinge pins, the front upper hinge pins and the pins that go through the wing mount. I have more money tied up in my Outcast than I do my Tekno ET48.3.
View attachment 165568View attachment 165569
They work better than the stock V1 shocks did, the V1 shocks I was either bending the 3.5mm shock shafts or breaking the pistons. I cannot compare them to the current shocks as I have not used them but I hear the current shocks are much much better than the V1s. I do need to get some new shock springs for them though as these are rather worn out now.Nice rig brother how are the tekno shocks?
For sure was just curious about shock upgrades because I don't hear much about it. Must be better now.They work better than the stock V1 shocks did, the V1 shocks I was either bending the 3.5mm shock shafts or breaking the pistons. I cannot compare them to the current shocks as I have not used them but I hear the current shocks are much much better than the V1s. I do need to get some new shock springs for them though as these are rather worn out now.
View attachment 165589
10x maybe moreDidn't think the post was "list what upgrades are best to start with" it's "Notorious tips and upgrades" and he asked us to share our tips and upgrades so I did.... Not sure what you think I was supposed to post and you can disagree all you want but my rig will take 5x the bashing a stock rig can definitely far from a newby rig more so an advanced basher rig
Yeah now most guys go with the M2C standoffs, M2C shock caps and the M2C pistons. Some of the heavy guys are looking for stiffer springs.For sure was just curious about shock upgrades because I don't hear much about it. Must be better now.
10x maybe more
Yea that's what I probably need for xl kraton.Yeah now most guys go with the M2C standoffs, M2C shock caps and the M2C pistons. Some of the heavy guys are looking for stiffer springs.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!