- Messages
- 2,023
- Reaction score
- 3,746
- Arrma RC's
- BigRock
- Kraton 8S
- Kraton 6s
- Kraton EXB
- Mojave
- Mojave EXB
- Nero
- Notorious
- Outcast 8s
- Outcast 6s
- Senton 6s
- Talion
It's finally Siren time again. I'll follow @TpPartsRcXtreme lead and rebuild one of the most ridiculous little rig ever. . . BUT,
This truck has been sitting for a LONG time looking just like this:
Beat up & gutted for a rebuild. But the 8S trucks popped up so it's been waiting for 3 years. So I'm going to go a bit extreme with it & see just how much of a tank it can become. Anything that can be aluminum will happen. except for the arms & links. I still have to keep some weaknesses to keep the core from getting wrecked. I grabbed every spare part I had on hand before dumping dough into it & it got me this far . . .
Now all I need to do is order parts. I'm going to go with Mojave arms. Replace all the hubs, suspension pin hangers, lower braces, center diff section, steering rack, & diff cases in red aluminum. I obviously had to put the Corally system in it. Although the truck is small, all that aluminum will still weigh it down. I'll probably end up changing the diffs over to limited slip EXB as well. I've been working on this thing for 2 weeks now, mainly making the center support work as the ESC holder. It should be able to fit any Stampede body when I'm done - since that truck has the most 1/10th bodies by far.
This truck has been sitting for a LONG time looking just like this:
Beat up & gutted for a rebuild. But the 8S trucks popped up so it's been waiting for 3 years. So I'm going to go a bit extreme with it & see just how much of a tank it can become. Anything that can be aluminum will happen. except for the arms & links. I still have to keep some weaknesses to keep the core from getting wrecked. I grabbed every spare part I had on hand before dumping dough into it & it got me this far . . .
Now all I need to do is order parts. I'm going to go with Mojave arms. Replace all the hubs, suspension pin hangers, lower braces, center diff section, steering rack, & diff cases in red aluminum. I obviously had to put the Corally system in it. Although the truck is small, all that aluminum will still weigh it down. I'll probably end up changing the diffs over to limited slip EXB as well. I've been working on this thing for 2 weeks now, mainly making the center support work as the ESC holder. It should be able to fit any Stampede body when I'm done - since that truck has the most 1/10th bodies by far.
Last edited: