dx5 pro launch control

[orbens]

anyone using this and can help?
need to do a good setup for drag and idk why the acceleration look like that and not linear?

 

[SrC]

Yeah doesn't look like Launch Control is good at all.
It's far from linear.
But I woudn't place too much credence with the the GPS analyzer.
There are many other factors, like traction when it comes to Drag. This is reflected in that GPS result.

 

[Senton_Prime]

Nm..

I wonder if your peaking on power.. what's the setup

 

[orbens]

Nm..

I wonder if your peaking on power.. what's the setup

here is the setup:
- limitless v2
- Castle 1721 - 2400KV motor w/ 23t pinion
- Stock spur - 39T
- MMX8S ESC
- 2X CHNL 120C 5600mAh racing 4S LiPo
- Stock Diffs
- Spektrum RC SR6100AT with avc
- BETU servo 55KG 8.4V
- BSR foam wheels (XXPink) no prep

 

[dure16]

here is the setup:
- limitless v2
- Castle 1721 - 2400KV motor w/ 23t pinion
- Stock spur - 39T
- MMX8S ESC
- 2X CHNL 120C 5600mAh racing 4S LiPo
- Stock Diffs
- Spektrum RC SR6100AT with avc
- BETU servo 55KG 8.4V
- BSR foam wheels (XXPink) no prep

Are you sure the MMX8S can handle that motor? Could that be part of the problem here?

 

[orbens]

@dure16 you are right... the MMX8s is dead i will change it to xlx2

 

[Straykiwi]

You need to get some prep, also the GNSS GeForce is calculated and not measured…