So basically using everything scrouced rc has to offer in this one, a Cordova motor 1700kv running the 15/42 diffs from an infraction V2, the rear hinge pins are running a 0.7 degree angle (least I think that's what I set it to I'd have to check) using the Jag body.
The wires tuck in really nice under the torsion bar and the rear has a Markhor infraction brace. (It did have a front one on but due the perfect pass shafts been 10mm had to take it out) as mentioned running the perfect pass shafts which if they perform as well as they look and feel should be amazing! I also found a neat little trick, the scrouced spool shims work amazing on the hex's of the car to take away all the slope out of them. On the 4th one I did have to rummage through the bag as they must be really small tolerance on them, but everything moves freely, and no bidding with just one shim!
Also with this chassis bare in mind you need the build the front end up off the car and then bolt it to the chassis it confused me for around 10 mins scratching my head as to how I was going to get my tools in there. But I finally went and off I went.
If you have any questions please feel free to ask away and I'll happily answer them the best I can lol
Cheers
The wires tuck in really nice under the torsion bar and the rear has a Markhor infraction brace. (It did have a front one on but due the perfect pass shafts been 10mm had to take it out) as mentioned running the perfect pass shafts which if they perform as well as they look and feel should be amazing! I also found a neat little trick, the scrouced spool shims work amazing on the hex's of the car to take away all the slope out of them. On the 4th one I did have to rummage through the bag as they must be really small tolerance on them, but everything moves freely, and no bidding with just one shim!
Also with this chassis bare in mind you need the build the front end up off the car and then bolt it to the chassis it confused me for around 10 mins scratching my head as to how I was going to get my tools in there. But I finally went and off I went.
If you have any questions please feel free to ask away and I'll happily answer them the best I can lol
Cheers