Infraction Infraction Active Air Intake - Free Powerful Cooling System!!

[nomis38]

Hello all! The active air intake is back and FREE "As Always"!!

Ram Air for your Infraction or Felony. Enjoy!!

File Downloads:
https://www.thingiverse.com/thing:6365292


Build Vid:

 

[john 8s]

Very cool.

 

[King blitz]

Hello all! The active air intake is back and FREE "As Always"!!

Ram Air for your Infraction or Felony. Enjoy!!

View attachment 336244

View attachment 336246


View attachment 336243


File Downloads:
https://www.thingiverse.com/thing:6365292


Build Vid:

That's sweet

 

[blaster27]

Can you make a wing for my Felony? On the wing would say STATE POLICE. Thanks, Mike.

 

[nomis38]

Can you make a wing for my Felony? On the wing would say STATE POLICE. Thanks, Mike.

Is this what you mean???

All holes are pre-made to self tap M4 screws. So no nuts are necessary when mounting, just screws!!

 

[nomis38]

Here are the files Sir!!

https://www.thingiverse.com/thing:6366190

I have updated this, minor aero-dynamic adjustment, and also there is two files available now. One with normal sized rudders and one with over-sized rudders.

Enjoy!!!

 

[nomis38]

I have updated the files on the Infraction one. Both wide and regular are now available for download. The wide version I did not print or test, but measurement wise it should fit just fine. It averages 10mm wider overall.

https://www.thingiverse.com/thing:6365292

 

[King blitz]

Is this what you mean???

All holes are pre-made to self tap M4 screws. So no nuts are necessary when mounting, just screws!!


View attachment 336312View attachment 336311

That's also sweet

 

[nomis38]

That's also sweet

Thank you sir!!

 

[King blitz]

I started a while back making a custom cooling system for one of my builds and it involves a 30mm fan installed in the scoop running a duct hose to my ESC .so looking at your print I was wondering ,could you make a bracket inside the scoop so I can install that fan? My idea will work fine ,but with your print it saves me a lot of time modding up what I have in mind .mine involves a lot of cutting up prices of plastic and glueing them up.yours would be a lot easier and less headache .which I don't mind due to I love customizing and modding but if I can save time that would be great .let me know what ya come up with thank you.
The fan has 4 mounting holes .I believe just two screws would be enough to hold it if that would save time designing.thanks .what ever ya come up with thanks.

 

[CherrieNL]

Wow nice!

 

[King blitz]

I originally started designing my cooling system for my stretched Big papa Long Rock but I also want to add it to my infraction..I'm using a delta plastics Corvette cover .I'm not worried about fitment.i can always custom make it to fit what ever cover I use.i just want to be able to run a fan in the scoop.for a added constant flow of air being pulled in by the fan .
I made a scoop from a purex detergent bottle and I my idea was to install a fan inside . running two red duct hoses on top of the ESC fan and motor fan .I'm going to have to pm you on other thoughts.maybey making one hood scoop more like what i came up with.i have to many crazy ideas but then again Big papa long Rock is a crazy ass build
I also want this system in my 8s infraction.i have not started thoughts on this yet

 

[King blitz]

I'd like to run 2 red duct hoses from these openings.but the top would need to be closed off ,so air flow is not lost and directed only through the hoses.

This is the type of duct I plan to use ,comes in different sizes ,and colors .it's flexible and I believe it would work great and look super cool in red running inside my clear Corvette body for the infraction..

 

[Tex Koder]

I'd like to run 2 red duct hoses from these openings.but the top would need to be closed off ,so air flow is not lost and directed only through the hoses.

View attachment 336505
This is the type of duct I plan to use ,comes in different sizes ,and colors .it's flexible and I believe it would work great and look super cool in red running inside my clear Corvette body for the infraction..

Those will be some tiny fans..
20 - 25mm?

I'm guessing.

 

[King blitz]

Those will be some tiny fans..
20 - 25mm?

I'm guessing.

I want to use 30mm

Those will be some tiny fans..
20 - 25mm?

I'm guessing.

That's the thing,I don't know the measurements of the 3d printed duct opening.id like to have either one fan in the hood scoop ,or two in the duct work.

 

[305HemiGuy]

Man you guys make me wanna get into 3-D printing! That hood scoop for the infraction is sick!

 

[Tex Koder]

Man you guys make me wanna get into 3-D printing! That hood scoop for the infraction is sick!

Nobody is stopping you..

Roll up your sleeves and join in the 3D Craziness!
Make some stuffs

 

[nomis38]

I'd like to run 2 red duct hoses from these openings.but the top would need to be closed off ,so air flow is not lost and directed only through the hoses.


This is the type of duct I plan to use ,comes in different sizes ,and colors .it's flexible and I believe it would work great and look super cool in red running inside my clear Corvette body for the infraction..

I can assure you no fans are needed.... Never the less haha, easy peezy sir.

Perfect 35mm fan placement is now a thing per consumer request hahahah

Man you guys make me wanna get into 3-D printing! That hood scoop for the infraction is sick!

Yes sir have at it. It's cheap as hell honestly. I mean my setup isnt super cheap. But entry level is.

Those will be some tiny fans..
20 - 25mm?

I'm guessing.

Surprisingly the openings were the perfect size, no readjustments had to be made. Just create a 35mm fan shroud fitting and place it.


@blaster27 - How do you like your Wing Sir?



@King blitz - It will be available for download soon on thingiverse. Their site takes for ever to update once you make changes to a thingi.

https://www.thingiverse.com/thing:6365292

 

[Tex Koder]

I can assure you no fans are needed.... Never the less haha, easy peezy sir.

Perfect 35mm fan placement is now a thing per consumer request hahahah

View attachment 336525View attachment 336524







...

@King blitz - It will be available for download soon on thingiverse. Their site takes for ever to update once you make changes to a thingi.

https://www.thingiverse.com/thing:6365292

Those are some Big internal vent ducts..!
Does the body even fit over the chassis with those installed?

 

[King blitz]

I can assure you no fans are needed.... Never the less haha, easy peezy sir.

Perfect 35mm fan placement is now a thing per consumer request hahahah

View attachment 336525View attachment 336524







Yes sir have at it. It's cheap as hell honestly. I mean my setup isnt super cheap. But entry level is.



Surprisingly the openings were the perfect size, no readjustments had to be made. Just create a 35mm fan shroud fitting and place it.


@blaster27 - How do you like your Wing Sir?

Looks great What about the top? Can you have it sealed off ? And could ya make two shrouds to accommodate the flex hose ? Also for my infraction could you make the hood scoop lower and wider and a tad bit longeroh and one more thing .can ya make it in red as you can see I got alot of red going on in this creation

Those are some Big internal vent ducts..!
Does the body even fit over the chassis with those installed?

I was wondering myself like does the vent ducts sit behind the shock towers?