Jamr
Very Active Member
- Messages
- 444
- Reaction score
- 1,121
- Arrma RC's
- Fireteam
- Gorgon
- Infraction
Looking for some direction.
I have been looking all day for some adjustable turnbuckles and steering links for my 3s Infraction. Here is the exploded view.
The steering links are 45mm in length with a 3mm hole and 10mm gap. The Gap is the distance of the end piece from side to side or the size of the hole the end piece fits in.
The top front turnbuckles are 55mm in length with a 3mm hole and a 10mm gap.
The top rear turnbuckles are 52mm in length with a 3mm hole and a 10mm gap.
I am not sure how to find upgrades for this part. A simple search has produced nothing that is close and a search on AMain has nothing either.
I am all over Alibaba and cant find anything close.
I know a Typhon is close but some of their front end parts are different than the Infraction so I am not sure if their turnbuckles and steering rods would work. To make it harder, the front and rear turnbuckles are a different length with the rear turnbuckles being shorter close to 3mm.
If someone has a Typhon, can they confirm my measurements are close to their turnbuckles? Thanks in advance. If they are close I can get those.
Not sure where to go here.
Thank for the help.
I finally found a Typhon Kit here. I guess I can order it and see if the lengths work.
I have been looking all day for some adjustable turnbuckles and steering links for my 3s Infraction. Here is the exploded view.
The steering links are 45mm in length with a 3mm hole and 10mm gap. The Gap is the distance of the end piece from side to side or the size of the hole the end piece fits in.
The top front turnbuckles are 55mm in length with a 3mm hole and a 10mm gap.
The top rear turnbuckles are 52mm in length with a 3mm hole and a 10mm gap.
I am not sure how to find upgrades for this part. A simple search has produced nothing that is close and a search on AMain has nothing either.
I am all over Alibaba and cant find anything close.
I know a Typhon is close but some of their front end parts are different than the Infraction so I am not sure if their turnbuckles and steering rods would work. To make it harder, the front and rear turnbuckles are a different length with the rear turnbuckles being shorter close to 3mm.
If someone has a Typhon, can they confirm my measurements are close to their turnbuckles? Thanks in advance. If they are close I can get those.
Not sure where to go here.
Thank for the help.
I finally found a Typhon Kit here. I guess I can order it and see if the lengths work.
Last edited: