Hello to all.
I got my 1/7 Infraction v2 in late January 23’ and drove it around a few times before I was instantly hooked and started nodding it. It’s safe to say it’s been all down hill from there. I have two Chevy trucks (67 C10 and 92 OBS) builds I’ve put on hold because of this new addiction.
In the middle of all this I picked up a used Felony on market place for my son and have been updating a few things. Mostly just original arrma parts. The original chassis was damaged from a previous owner crash, so I decided get a new chassis and clean it up some.
I’m currently awaiting some stuff to come in but so far here’s how its going..
TP 4070 2400KV
Mamba X 8s w/ QS8 Connectors
2X CNHL 4S 6000 88.8 65 C Black Series
Spektrum DX3 TX
Limitless Center Spool w/ ABEC 7 Bearings
500mil Diff Grease
GRP GTH04-XM5 1:8 GT T04 SLICK XM5 Medium Tires
SkyRC GPS GSM020
Scorched CF Front Splitter
Scorched CF Side Infills
Scorched CF F/R Shock Towers
Scorched CF Ackerman Steering Plate
Scorched CF Torsion Center Brace
Scorched CF Steering Top Plate
Scorched Ti Steering Stub Plate
Scorched Bell Crank and Servo Saver Delete
Scorched Steering Bell Crank Bearings
Scorched Ti Front and Rear Skid Plates
Scorched Ti Splitter Set Screws
Scorched Chassis Brace Eliminator
Scorched Chassis Front Infills
Hot Racing Alum Rear Body Mount Support
Hot Racing Alum Center Rear Brace Mount
Hot Racing Alum Diffuse Support
Hot Racing Alum Center Diff Cover EZL
Future plans
Upgraded Servo
Transmitter (not sure what to get)
TIRES TIRES TIRES
Ripple Killer Cap Pack
Ceramic Bearings
Carbon Driveshafts
Ti axles
I got my 1/7 Infraction v2 in late January 23’ and drove it around a few times before I was instantly hooked and started nodding it. It’s safe to say it’s been all down hill from there. I have two Chevy trucks (67 C10 and 92 OBS) builds I’ve put on hold because of this new addiction.
In the middle of all this I picked up a used Felony on market place for my son and have been updating a few things. Mostly just original arrma parts. The original chassis was damaged from a previous owner crash, so I decided get a new chassis and clean it up some.
I’m currently awaiting some stuff to come in but so far here’s how its going..
TP 4070 2400KV
Mamba X 8s w/ QS8 Connectors
2X CNHL 4S 6000 88.8 65 C Black Series
Spektrum DX3 TX
Limitless Center Spool w/ ABEC 7 Bearings
500mil Diff Grease
GRP GTH04-XM5 1:8 GT T04 SLICK XM5 Medium Tires
SkyRC GPS GSM020
Scorched CF Front Splitter
Scorched CF Side Infills
Scorched CF F/R Shock Towers
Scorched CF Ackerman Steering Plate
Scorched CF Torsion Center Brace
Scorched CF Steering Top Plate
Scorched Ti Steering Stub Plate
Scorched Bell Crank and Servo Saver Delete
Scorched Steering Bell Crank Bearings
Scorched Ti Front and Rear Skid Plates
Scorched Ti Splitter Set Screws
Scorched Chassis Brace Eliminator
Scorched Chassis Front Infills
Hot Racing Alum Rear Body Mount Support
Hot Racing Alum Center Rear Brace Mount
Hot Racing Alum Diffuse Support
Hot Racing Alum Center Diff Cover EZL
Future plans
Upgraded Servo
Transmitter (not sure what to get)
TIRES TIRES TIRES
Ripple Killer Cap Pack
Ceramic Bearings
Carbon Driveshafts
Ti axles
Last edited: