My rig so far

Trickelitrick

Well-Known Member
Messages
244
Reaction score
191
Location
Sweden
Arrma RC's
So here are my current upgrades etc:
  • Fast eddy bearings everywhere
  • Tekno orange springs all around
  • GKA chassis braces and servo mount
  • tower to tower braces by @Mike Foucart
  • Savox 1210sg
  • hobbywing heatsink combo c4
  • RPM wing mount
  • RPM front bumper
  • tall sideguards
  • TBR wheeliebar
  • TBR mudguards
  • Proline 6" ledbar
  • Proline badlands mx38 just taped them
  • Dusty motors shroud cover and black socks on shocks behind springs
  • HR center diff carrier
  • ESC warranty replaced with hobbywing wp8 bl150
Right now waiting for a replacement receiver as well cause its dead since the ESC incident so here is what it looks like right now.

20170505_103916.jpg
 
Last edited:

Trickelitrick

Well-Known Member
Messages
244
Reaction score
191
Location
Sweden
Arrma RC's
locked the center and got many issues in front and rear diff....had to find the right thickness on the outer shims, in my case i ended up with a total of 0.9mm left front and left rear, two 0.2mm and one 0.5mm. now there is no slack and it spins very smooth as well :)
 

Trickelitrick

Well-Known Member
Messages
244
Reaction score
191
Location
Sweden
Arrma RC's
Tx for pimping my post mate :)

also the front dirtguards inside the body but i removed them because i believe i need that airflow
 
Top