Big Rock Replacement pins for hot racing 17mm hubs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Messages
42
Reaction score
53
Location
Lowell,MA
Arrma RC's
  1. BigRock 4x4
If anyone loses a pin in the hot racing 17mm hub adapters. These work nice. Closest match I could find. They are only .2mm shorter than the ones that come with the HR kit.
 

Attachments

  • 20190616_105149.jpg
    20190616_105149.jpg
    282.2 KB · Views: 50
I'd already lost a few when I failed to tighten the barrel nuts sufficiently. Thanks for the info. :cool:
 
I was on the hunt for 2.5x15.2mm pins today. Ended up finding something close at menards and chopped them down to length. I have some real ones on the way, but JRC sent me the wrong order. I can’t wait another 4-5 days for that to show up, so I improvised.
 
I need some of these. Can't I just make some from nails? I was just thinking of cutting the head of the nail and the sharp end with some pliers and saving me some $.
You can certainly try but a hardened steel will be best. Anything softer will likely deform and fail.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top