Big Rock What tires are you all putting on your BRCC?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Set up for on road! Proline Prime Raids. I also have the the Badlands and Trenchers
6799A4B6-04E3-4C66-BEB1-45C8B769BF84.jpeg
 
Last edited:
bicketybam said:
The only thing I don't like about using the 14mm stock hexes is that the hexes themselves are junk. I can't tell you how many of the grub screw have stripped on me.
Click to expand...

I bought some longer grub screws that helped a little but every time I tighten them it's still up in the air
 
kantonburg said:
Interesting. Why are they stronger?
Click to expand...
Here is the normal 3S axle
1602391268434.jpeg


Here is the Typhon axle
1602391322739.jpeg


The big difference here to me is with the normal nut on stud style which is smaller in diameter than the Typhon style. Also the Typhon style has a grub inside almost making it a solid piece. Plus you get to use 17mm nuts. All around way better solution.
 
Thinking of putting these on pre-order. direct fit. No 12mmhex with 17mm adapter needed.

https://www.amainhobbies.com/duratr...ck-tires-w-14mm-hex-black-2-dtxc5538/p1226530
suchtragedy said:
Just mounted 1/2 offset 2.8 belted Duratrax Six Packs (17mm version using with Typhon axles/hexes). They are about 10mm wider diameter than 2.8 Badlands. Haven't tested yet but I like the aggressive look.

View attachment 103677

View attachment 103678
Click to expand...
Did you swap out dhocks or just switch to the aluminum bodies?
 
recove said:
What i need to buy to use this tires on my BR V3?
Click to expand...
Check out the last half of the second page of this thread starting here:
https://www.arrmaforum.com/threads/what-tires-are-you-all-putting-on-your-brcc.28635/post-398580
2 options. Replace the axle ends with typhon parts, or get an adapter. Both are listed in this thread.
Or you can buy the wheels with 14mm hubs.
https://www.towerhobbies.com/product/six-pack-st-2.8-mounted-tires-black-14mm-hex-2/DTXC5206.html (non belted)
https://www.horizonhobby.com/produc...d-front-rear-tires-14mm-black-2/DTXC5542.html
(Belted)
 
Oh that explains a lot then. Personally, I will likely go for the belted version with the 14mm hubs. the third option from above. no extra parts are needed, less ballooning than the non-belted version. Good luck.
 
Sorry, off topic, but I'm just hoping for a quick answer.
I don't have access to measure, doEs anyone know off the top of their head, or has quick access to measure, how big is the battery tray on the BRCC?
 
Here is what the recommended battery size recommendations are: 2S or 3S Lipo (Hardcase only) within dimensions 165 x 51 x 48mm / 6.5 x 2.01 x 1.89 inches
 
kantonburg said:
Wow. Seeing them side by side. Why they didn't come on there from the start I don't know. Or maybe they're laughing knowing they knew we'd be buying new wheels anyway.
Click to expand...
Exactly! They learned a lot from Traxx ass.?
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

danny1202
Kraton How do you like your punch?
2
Replies
38
Views
1K
danny1202
danny1202
B
Vorteks What Speeds Can Vorteks Tires Handle?
Replies
6
Views
258
Hector_Fisher
Hector_Fisher
P
Kraton Bigger 6s or 8s tires on a 4s
Replies
2
Views
207
farshadmaleky
farshadmaleky
B
Big Rock Bigrock 3S need your analysis on a problem
Replies
19
Views
635
Bustedaw11
Bustedaw11
murgas1
Mojave Arrma Mojave 4S. What have you broken?
2
Replies
30
Views
3K
bigbristv
bigbristv
Back
Top