Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Infraction v2What rig? What ESC? What type of driving?
I would go at least XT150 tbh. QS8 are clearly the best option. Not required tho. You can run the XT90s, but you’re risking burning out the ESC if amp draw gets high enough. Best way to know is check them for getting hot. If they get hot, swap them out.Infraction v2
Monster Mamba x
1260kv castle motor
Spool
Speed/bashing I want the power on demand or bash on old tires.
I have the qs8’s in hand I was trying to be lazy plus I never swapped battery connectors so hesitant there any tips for when I change the lipo connectors?I would go at least XT150 tbh. QS8 are clearly the best option. Not required tho. You can run the XT90s, but you’re risking burning out the ESC if amp draw gets high enough. Best way to know is check them for getting hot. If they get hot, swap them out.
Best advice I can give is take your time and make sure the packs are 3.6v per cell. They have very little power at that level and won’t cause a fire if shorted.I have the qs8’s in hand I was trying to be lazy plus I never swapped battery connectors so hesitant there any tips for when I change the lipo connectors?
Thanks for the help. I did not know that ,I appreciate will do ,thanks again.Best advice I can give is take your time and make sure the packs are 3.6v per cell. They have very little power at that level and won’t cause a fire if shorted.
Also, make sure to have the opposite gender plugged in the connector to keep the pins held in place while they are hot. Otherwise they will move around.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!