After searching google and the forum for the last hour or so I've decided to reach out to the experts. I recently installed a ripple killer 8s cap pack on my limitless running a 1717 motor and monster x 8s esc combo. Gearing was 30T Pinion and stock 34T spool. After the first 3 runs ripple was around .96v or so. After that on the same gearing and lippos my ripple jumped to 3.31v which is higher than it was before I installed the cap pack. My thoughts are I may have fried the pack, but I wasn't sure since that's not to crazy of gearing to my knowledge and only a 112mph pass at about 95% throttle which isn't too crazy compared to a lot of the guys and gals on here. Any ideas of what could be the problem would be greatly appreciated. I attached the 2 castle link logs from the passes I was referencing. I apologize they're a bit blurry.
Thank You,
-Robert
Thank You,
-Robert