Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
What did you do to seal up the diff so you could run oil in it?going to be racing my fazon and I pulled the diff brain and servo. sealed the diffs and will be running diff oil but would like to here what others are using for oil weight. thanks.
I sealed my diffs wit 2.5mm socket head screws with shoe goo for sealant. they need to be about 3-3.5mm long. no tapping needed they screw right in and no leaks. the epoxy should work but I would be afraid of it coming undone over time, the screws are not coming out unless you want them to. I run heavy grease in my center diff 10,000 in front and 7,000 in rear. works well , but I only use mine for racing, I don't bash.
I sealed my diffs wit 2.5mm socket head screws with shoe goo for sealant. they need to be about 3-3.5mm long. no tapping needed they screw right in and no leaks. the epoxy should work but I would be afraid of it coming undone over time, the screws are not coming out unless you want them to. I run heavy grease in my center diff 10,000 in front and 7,000 in rear. works well , but I only use mine for racing, I don't bash.
Did you ever end up doing this and any review?Are you still with the same setup for racing Centre 10,000, front and rear 7,000? My nero is understeering alot, i race it with my friends. I am thinking of removing diff locks and do something as you did.
Thanks
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!