ruizjunior83
Member
- Messages
- 18
- Reaction score
- 3
- Arrma RC's
- Typhon 6s
I’ve shimmed them with 2 shins behind main input gear and 3 next to the bearing on the out side for the mesh. And in mid air as I’m fliping (not very high either) I here the clack. And it continues. It was in mid air not a bad landing. For percaution I was jumping into sand. I’ve gone through 3 pairs of gears. I don’t know what else to do.
I’ve replaced the gearbox and still.
I’ve replaced the gearbox and still.