Oh, O.K. I looked-up "RC car PCB", and all I saw were pictures of what looked like the back end of an old transistor radio. Not simply the board for a cap pack. I'm not too swift on the internet.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
very cool! Cordova motors are awesome! Really expensive though.The new owner wanted a "bumper" to block the large opening in the front.
I 3D printed something for him.
View attachment 73965
He has fitted a Cordova motor and will be testing the car very soon.
View attachment 73966
I was able to test my Typhon with this same body (just shorter) and ran fine without the bumper, but I understand the concern.
-Liberty
Lookin' forward to finally see it do what it was built for....BLAST!!!!The new owner wanted a "bumper" to block the large opening in the front.
I 3D printed something for him.
View attachment 73965
He has fitted a Cordova motor and will be testing the car very soon.
View attachment 73966
I was able to test my Typhon with this same body (just shorter) and ran fine without the bumper, but I understand the concern.
-Liberty
He does post some of his runs but not all of them. I'll add it to this thread once I see a video of it.Not a bad easter presi he has there, do you know if he is going to film his maiden run by any chance? Would love to see it rip
I would just use the mold as my bodyView attachment 53875
Yesterday I wet sanded the mold all the way up to 1500 grit, and then ran over it with buffing compound and polish.
Tuesday I took a day off and will be doing a test body out of fiberglass. (the final will be Carbon Fiber )
Hopefully I have enough resin left!
Why where you selling it without even running it over 100?A sad but exciting day. The Unlimited is listed up for sale on eBay officially!
View attachment 67445
Everything is finished. I determined to use a bearing setup for the steering post issue:
View attachment 67463
Final pics of the completed project:
View attachment 67446
View attachment 67447
wow no one as posted in this for 21 months. I enjoyed reading the hole thread, Thanks for all the info @LibertyMKiii.
Do you have a like to the guy's YT?
Before I saw this and before Raz started on his quad motor build I drew up plans for a stretched limitless with quad motors all running on 8s (on paper ) 600mph+ 32s!!
The 200+ build or the Unlimited build?I have no doubts I can do 200+ with this car once it is done and I can get it on an airport.
The 200+ build.The 200+ build or the Unlimited build?
Yes they did sell very well.I am thinking about making my own high speed drive shafts, did Raz's sell that well for being that pricey?
This one sold back in March of 2020.... 3 years ago now (crazy to think it has already been that long)Hey Liberty, love the build. Have you checked out ScorchedRC lately? 3 things he put out recently I think will help achieve greater efficiency/higher speeds. He just put out a T7075 front steering knuckle and rear hub with oversized bearings. Less prone to fail at high speeds. Also the Triton front shaft helps to eliminate drive shaft wobble created by the offset of the front diff carrier. With it having the tilt for camber purposes the driveshaft creates friction and potential wobble.
Look forward to seeing more awesome things you’ve done!
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!