Mustangman66$
Active Member
- Messages
- 298
- Reaction score
- 246
- Arrma RC's
- 4x4-Mega
- Granite
- Outcast 6s
- Outcast 4s
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have a couple ecx cars with 2s batteries, same ec3 connector is nice.
DamnNope, this is the bigger EC5. Same basic design, but 5mm bullets instead of the EC3's 3.5mm bullets.
As far as the XT60/90 vs EC3/5 - I also have some ECX stuff, so EC3 plugs. Most all of my 1/10 and smaller is a mix of EC3 and XT60 - they are sort of compatible. (XT60 on the ESC will take EC3 batteries) I recently started migrating my leftover EC3 over to XT60 - I just like them better. EC3 are dead easy to solder, but everything else is better about the XT plugs.
Long way of saying, I wish the new cars had XT90 plugs, but hey, it is HH. So we know we will get E-flite plugs and Spektrum radios (eventually).
LOL, even the HH site, same page says AD5 in text description, then show a AD7m in the pics...look at the spec's for the servo ones said ads 5 and other said ads 7 so which is it
they areI was looking earlier and think the new ones may be 32p pinion/spur and have different tooth counts on the differentials also.
I'll take 4 of the hopups plzFor whoever complained about the pre-drilled motor mount:
Stock:
https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXHAXH&P=7
Hop up:
https://www.towerhobbies.com/cgi-bin/wti0001p?&I=LXHAXL&P=7
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!