Gonna warranty esc. Got an answer but just in case if others ever need to know.
Does it matter if rx tx are changed if warranty esc?
No shouldnt. Right?
Does it matter if rx tx are changed if warranty esc?
No shouldnt. Right?
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Come to think of it. I don't even remember hitting which group. My bad I had sat the phone down in the whole process. My apologiesI don't see how changing the TX or RX would void the warranty, unless they determined that the ESC was damaged by plugging it in backwards to the RC or something, but I very much doubt they'd reach that conclusion without you telling them directly if thay was the case.
Also, for future reference this is a vendor part of the forum for 3DRC, this kind of post should probably be in Electronics or General Chaos right @slick2500?
Gonna warranty esc. Got an answer but just in case if others ever need to know.
Does it matter if rx tx are changed if warranty esc?
No shouldnt. Right?
As far as I know the only things that void the warranty on the esc are changing the plugs or physically modifying the esc.
You should be fine unless you did what he said above And modified the ESC in anyway. I’m going to attempt the same thing with my vorteks. Now that I’m driving it so much more it’s driving me nuts how LVC is set at 3.6-3.8. I’ve heard there is an update for it so I’m going to ask for that first and then push for replacement.
Get luck with your warranty process buddy! I believe you’ve done it before and have the process down, right?
No. Was going to b4 but the not so LHS actually fixed me up. Now with out income the extra drive is out. I messaged HH late last night. IdkYou should be fine unless you did what he said above And modified the ESC in anyway. I’m going to attempt the same thing with my vorteks. Now that I’m driving it so much more it’s driving me nuts how LVC is set at 3.6-3.8. I’ve heard there is an update for it so I’m going to ask for that first and then push for replacement.
Get luck with your warranty process buddy! I believe you’ve done it before and have the process down, right?
No sir. Put black tape around wires so they wouldn't flop about. What about if where "some guy I know" may have pinched wires when putting the top of the rx box back on....damn dude lol(me)^^^ This - as well as any electrical malfeasance (eg, motors outside the spec limit of the ESC)
Yeah unfortunately I'd say if that is the issue (broken wire) that would be user error and they wouldn't be liable and it would void said warranty in my understanding.No. Was going to b4 but the not so LHS actually fixed me up. Now with out income the extra drive is out. I messaged HH late last night. Idk
No sir. Put black tape around wires so they wouldn't flop about. What about if where "some guy I know" may have pinched wires when putting the top of the rx box back on....damn dude lol(me)
Probably. Esp now I can't replace it on my ownYeah unfortunately I'd say if that is the issue (broken wire) that would be user error and they wouldn't be liable and it would void said warranty in my understanding.
Kinda all in the same problem. Its honestly more user error. Story of my life.I remember your thread now. Is this a new issue that you’re requesting a warranty on or the smashed wire? I would agree that smashed wires are oh the user and not a warranty issue but it’s something that’s easily fixed unless something shorted out when the wires got smashed.
Its not all the way thru. And was working b4 I switched rx tx. Ive tried to reset ESC. It won't. Now also when I turn it on it beeps 1 time. Then red LED flashes. And it won't do
View attachment 180032
View attachment 180033
I’ll pm ya in a bit. If you don’t see it in the next hour, pm me first. Sometimes there are issues with my pm I’ve been told.
Kinda all in the same problem. Its honestly more user error. Story of my life.
I noticed the wires when putting it all back together. So now I have no clue
So I shook the tx just a bit. And I can hear something very small but loose moving around the inside of the controller.So was gonna put 1 more try in to get some diff results. I turned the Tx on then the truck. Immediately nothing happened. But then I sat TX down on the table and the servo centered itself. I checked steering it was responsive THEN BAM!!!! S.O.B goes full throttle on me again!!
Turned it off. Both TX and truck. Started again. TX on. Then truck. Nothing. I tapped the Tx and servo kicked and truck goes full throttle again!! Wtf?
Right on. Thanks for the info. No new anything will be able to be budgeted for a while.Those Tx battery terminal leads are serious weaksauce. Apparently, Spektrum thinks they're toys.
That white wire in the munched up harness pictured is a signal wire. Those kinks are so tight that I'd be surprised if the wire wasn't holding on by a strand. One intermittently contacting strand. Worth learning to solder over in my book. This stuff comes up again and again for the hobbyist, crashing this and breaking that. It would be cheap to get the basics on Amazon. Then you can catch fish for a lifetime.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!