Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I just did this upgrade, but I used the original Servo arm and it matched up well. Only issue was holes lining up for servo plate, just loosened the bottom posts to get the plate on and it worked out well.
I have the Savox 1210, & mounted as shown in the pics ,it's taller than those aluminum posts by about the width of that servo plate....I'll have to find some spacers.The servo (savox1210sg)itself is to wide to fit in that plate, a little touch up with a dremmel to the plate and all is good. We'll worth the upgrade-seems bulletproof now.If you're tried of all the flex in the servo mount while turning in the Arrma Kraton this servo mount upgrade will certainly fix the flex issue.
Parts used:
The results speak for themselves...
View attachment 4
View attachment 2
View attachment 3
Thanks to Primal for sharing.
No of course not, you can also get aluminum servo mounts from @gregmbrandt from GKA Custom RC or from @Jaycas from Voltage Hobbies - both make mighty fine aluminum servo mounts!Wow!! is there no place to get a Servo Mount other than doing the DIY project?
hey do you know if this servo mount fits a savox 1270tg because i tried instaling my savox to the stock mount and i am having those flex issues u speak of as well as and incomplete range of motion when i tested d servo when i make a left or right turn.I guess i should add that i installed it with a axial 25t servo horn ples ur input would be great help!!If you're tried of all the flex in the servo mount while turning in the Arrma Kraton this servo mount upgrade will certainly fix the flex issue.
Parts used:
The results speak for themselves...
View attachment 4
View attachment 2
View attachment 3
Thanks to Primal for sharing.
yes that has to be done to all the savox servosHad to take my SW1210SG apart to get it to fit into my GKA brace.
So much better than stock, might not even return my broken stock in on warranty. Don't wanna have to pay the shipping lol
NICEI decided to cut the posts to around 25mm and mount on top, don't get why buy the expensive axial posts, there is lots of cheaper ones like this one.
The other thing is now that you have control of the car your driving tactics change ....and the saver where there bearings are put a shim in to stop the rocking and up and down motion ...it should help
where did you order the braces? I can't find them in stock anywhere.Hey all, new here, just got my kraton, and looking to suss out all of the weak points on it. I ordered the servo plate and a handful of brass m3x30 hex standoffs instead of the aluminum standoffs as they are on serious backorder.
I also have the Hot Racing front/back braces being shipped to me as we speak (anyone using them?).
Looking to get the T-bone racing bumpers purchased soon too.
Ill let you know if the brass works, but there is also aluminum standoffs with flanged hex ends on amazon for a good price, but I want it strong! From my quad building experience I know aluminum standoffs are strong, but prone to catastrophic failure when the steel bolt strips the aluminum like butter when crashing...err..flying.
M3 x 30mm Female Threaded Brass Hex Standoff Pillar Spacer Nut 25pcs https://www.amazon.com/dp/B015A3LROO/ref=cm_sw_r_other_apa_lDBOyb02TGZ4Rwhere did you order the braces? I can't find them in stock anywhere.
What about the Hot Racing braces?M3 x 30mm Female Threaded Brass Hex Standoff Pillar Spacer Nut 25pcs https://www.amazon.com/dp/B015A3LROO/ref=cm_sw_r_other_apa_lDBOyb02TGZ4R
Standard Servo Plate A https://www.amazon.com/dp/B00KRJ5VA8/ref=cm_sw_r_other_apa_rEBOyb1F84MB6
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!