- Messages
- 4,714
- Reaction score
- 6,368
- Location
- Statesville nc
- Arrma RC's
- BigRock 4x4
- Kraton 6s
- Kraton 4s
- Outcast 6s
- Talion
- Typhon 3s
Tt pro with new wheels n body. Waiting on hub conversation to mount um. Hopefully be here tomorrow
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
6mm offset I hope it’s enough or I’ll be cutting up the new bodyNICE^^
They always do till they get beat! Did you go with an offset and how much?
Those 1/8 Buggy wheels look killer! I was on a good streak of not ordering things until i saw this? damn you guys? What parts are needed to make these fit? I know the stock hexes are 12mm and the buggy wheels are 17mm?
Thanks, I’m probably gonna keep running stock tyres as they hook up well where I run, when they wear out I’m probably just gonna get some short course tyres for it?https://www.amainhobbies.com/hot-ra...hub-adapters-4-6mm-offset-hrawh17hs01/p649937
The stock losi 12mm hexes on the buggy are not thick enough to be able to tighten these down right without them binding on the carrier. I know outcast used a washer as a spacer and I used some traxxas rear black 12mm hexes for a slash. They are thicker than the losi ones. The front traxxas gray hexes are too wide for the nut to grab any threads so if you use that method make sure to order the right part. I ordered the aluminum traxxas hexes but the derlin/plastic ones are holding up.
Thanks, I’m probably gonna keep running stock tyres as they hook up well where I run, when they wear out I’m probably just gonna get some short course tyres for it?
imo the 1/10 short course wheels look a little cooler, but I can definitely see the benefits of running the 1/8ths. You know you want that that 1/8 build. Do it! Do it! Do it! Do it! ??
I like the 1/8 options, lighter, no ballooning, well not as much... It might even spark off a 1/8th build for me.. Here I go again...
imo the 1/10 short course wheels look a little cooler, but I can definitely see the benefits of running the 1/8ths. You know you want that that 1/8 build. Do it! Do it! Do it! Do it! ??
XRAY XB8E ? Or Mugen Seiki MBX8 ??I do! Real bad! Wouldn't be Arrma or Losi though. Problem is I wouldn't be able to race it, nothing going on by me track wise.
Tekno?XRAY XB8E ? Or Mugen Seiki MBX8 ??
XRAY XB8E ? Or Mugen Seiki MBX8 ??
No they are not. The dB has a hinged flip up style body the tt just uses the good ole body clip. You’d have to change all the body mounts to switch umHave a question about the tt pro and db pro, are the bodies interchangeable? If so I would like to know if you have the Buggy can I get a tt body and put it on the Buggy? Thanks for your help.
Macspacey out!
PEACE!!!
I’ve got one on back order. Looks like a sweet part. I put bearings in mine first thing and a ds3225 and it the wheels can keep up???Installed the Exotek aluminum steering, it weighs a whole 1 gram more that the stock. Love the fact that its got bearings in the drag link too! Very smooth, took out lots of steering slop.
View attachment 73500
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!