Dmkkings
Active Member
- Messages
- 187
- Reaction score
- 49
- Location
- Torrington, Wy
- Arrma RC's
- Felony
- Infraction
- Limitless
- Mojave
- Vendetta
I need some advice on what motor and Esc should i use for the limitless along with what servo
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I am not trying to do 100 mile speed runs just trying to go in the 70/80 i installed the electronics from a typhon blx 6s and it is overheating and the esc is doing thermal shutdownsWhat is your budget? What type of driving will you be doing?
34 t spur and 27 th pinion
OkThose gears are not really made for bashing. If I were you, I would replace the center spool with a 46T infraction diff and a 20T pinion gear. Grab some fans for the motor.
So if i leave it the way it is with the electronic that are in it i will eventually burn out the motor correct rite know i have the electronics in it from a typhoon 6s blxA lot cheaper than a ESC and motor. But if you want to spend some coin, I ran a mmx8s with a 1717 1650kv motor 23P/46S and reached 81mph. I can empty a pack on a go kart track without overheating. Zipping back and forth wide open constantly it will heat up.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!