My slipper clutch keeps getting loose every run im quite tired really i tried locktite i tried sanding the spring nothing does it:/
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Can you check the front side of the assembly and see if the bushing has snapped off? Mine did and couldn’t keep it tight, no matter what. I also snapped off the screw at one point trying to get it tighter and didn’t realize it. I’m waiting for a whole new assembly to arrive. I also upgraded to a steel spur and slipper pads from HR. Maybe they are to blame somewhat.My slipper clutch keeps getting loose every run im quite tired really i tried locktite i tried sanding the spring nothing does it:/
I blue loctite my slipper every single time. I e considered red loctite if I could dial it in perfectly.Hi,
Humm... 4s is a lot of power for this slipper clutch (IMO)...
When we put MT wheels on the Mega BLX in 3s (on the pavement), full throttle, at the end of the session, the slipper clutch comes loose.
But we never had this problem on the track.
Loctite…? Really?
PL
Did you let the loctite set for 24 hrs before you ran the truck again?i tried locktite
I do every time, but it still gets loose somehow. ?? I’m going to get the new assembly dialed in and red loctite that B.Did you let the loctite set for 24 hrs before you ran the truck again?
That's aggressive.Edit; I might even drill thru and make it a spool
I’m sick of ending runs due to this POS slipper ?That's aggressive.
I know the feeling. The first time mine started slipping, I loctited the adjustment screw and let it set a few days. Fingers crossed it hasn't needed adjusting for the last 7 batteries.I’m sick of ending runs due to this POS slipper ?
Everything seems fine3 little spacers with a springCan you check the front side of the assembly and see if the bushing has snapped off? Mine did and couldn’t keep it tight, no matter what. I also snapped off the screw at one point trying to get it tighter and didn’t realize it. I’m waiting for a whole new assembly to arrive. I also upgraded to a steel spur and slipper pads from HR. Maybe they are to blame somewhat.
YesDid you let the loctite set for 24 hrs before you ran the truck again?
It kills my baterryI’m sick of ending runs due to this POS slipper ?
Check the inside of the front hub and see if the brass insert broke free. Mine did too.Okay i think the spring is stuck or doesn't do is job anymore i loose the slipper 1/2 turn and its completly loose
I need to loose it 1/10 turn to make it okay:/ should i contact horizon for this?
WhaT brass thing??i don't understandCheck the inside of the front hub and see if the brass insert broke free. Mine did too.
WhaT brass thing??i don't understand
If it brakes whats going to heppenb i think he is fine
You lose the ability to tighten it.If it brakes whats going to heppenb i think he is fine
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!