So I opened up the center diff in my Infraction. I noticed that underneath the planetary gear in the diff cup that there is already a washer between the orange oring and the dowell pin. I was thinking there would not be...
Should I replace it with the same size .2mm thickness washer that is larger in diameter or just leave the one that was originally installed from arrma.
Thoughts?
I will be adding one additional shim (total of 3, 2 from factory, 1 new) to each to the satellite gears as well. Using arrma part number AR709024 3.5x12x0.15mm.
Should I replace it with the same size .2mm thickness washer that is larger in diameter or just leave the one that was originally installed from arrma.
Thoughts?
I will be adding one additional shim (total of 3, 2 from factory, 1 new) to each to the satellite gears as well. Using arrma part number AR709024 3.5x12x0.15mm.
Last edited: