Wats your gear ratio and kv on your motor cause that's where I'm trying to beI’m running 2.34 in 132ft
don’t know what it would do in 188ft
Sounds fast!!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Wats your gear ratio and kv on your motor cause that's where I'm trying to beI’m running 2.34 in 132ft
don’t know what it would do in 188ft
Sounds fast!!
Tp power 5650 1440kv and geared at 36/34 overdriveWats your gear ratio and kv on your motor cause that's where I'm trying to be
Tp power 5650 1440kv and geared at 36/34
I got a castle 1520 1650 what should I be geared at for 132Tp power 5650 1440kv and geared at 36/34 overdrive
30/34 is where I would start. No more than one pass at a time and keep an eye on tempI got a castle 1520 1650 what should I be geared at for 132
You are geared way to high for 132ft. I'm running 28p46spur, running 2.1 @ 70-71mph pulling just over 3gsWell this has been a fun read. Here’s some real world info
Car runs 114mph on 8s and 98mph on 6s
limitless with tp 5650 1440kv in stock location on 1/5 motor mount
Mamba 8s and ripple killer 8s cap pack
Geared overdrive 36pinion/34spool spur
Only tested on rubber tires
here’s the first 2 passes
first pass was on 4s and hit 2.700 @ 54mph
Second pass on 6s with way more wheel spin and hit 2.750 @ 60mph
my gearing seems explosive down low. Any smaller pinion will just result in more wheelspin.
View attachment 147568View attachment 147567
View attachment 147569View attachment 147570View attachment 147571View attachment 147572View attachment 147573
+134 Spur/ 30 Pinion ratio is good for speed runs, but not in 132ft drag racing. You'll run out of track before your motor peaks.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!