Just a simple wing

[DetroitSS]

I started noticing on my speed runs after I cleared 80 mph the truck would start to wander. Not enough holding the back tires down maybe. So i made a really quick model and printed up a PETG+ wing with a crabon fiber base to keep it upright and create downforce but to flex a little under the higher top end speed. I am aware its purple but purposely done for visibility.

 

[jondilly1974]

Nice! Just be careful you don’t push the rear down so hard that it pops the nose up. Downforce is a delicate balance.

 

[Wes13]

Looks like the wing from the old vorteks that i ordered to try on the big rock.
I like this wing(exept the color)

 

[Doom!]

I thought this was gonna be about buffalo wings!

Let us know if this helps out with the back end issue. Looks pretty good.

 

[rotauq]

Formula 1 wings seem to flex as well, it doesn't need to be a bad thing

 

[DetroitSS]

The color was just for seeing if this will work. If it goes well or I have to adjust the angle then the final will be black carbon fiber nylon one piece.