Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Err... What diff shaft?
The only hole that is too big is the recess for the o-ring. The out drive shafts fit great. I'll double check for play tonight, but I remember it fitting nice.
Like i have told other get a center spool (solid shaft
) and run a revo adapter. Run any gearing you want.
The "spool" can be found at sagacustomrc. It's called a spur adapter. It allows you to run revo spur gears so you can run a 34t pinion and a 32t spur gear. It equals massive speedAnd I still don't know what adapter you are referring to... I've done revo searches, but have not found anything that looks like it would help?
I do know of the guy in the EU that makes custom spools, with custom spurs. His spool only works with his spurs, though. I think it was about +$100 for the set.
Oh, so I was searching the FB group, looking for my conversation with Mike, and found a thread on the Intigy spurs - Apperently they make a 38t and 40t spur for the HP apache that bolts up to the Arrma Center diff!
http://www3.towerhobbies.com/cgi-bi...7ce9Vfbdu2oP8SZ27965DyApHxBKuWjUk-RoC5l3w_wcB
Added to my tower wishlist...
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!