So thinking of buying this let me know

[XplicitRC]

Senton 6s seems to be collecting dust and person selling doesn't seem to know much about it ... Worth the $275??
Apologize if this isn't the right thread pretty much everything on the shelf comes with it

 

[Adamj804]

Go get it. Great price.

 

[SrC]

That Denton there is old and filthy. Not how you sell an RC. So maybe you can assume it wasn't mechanically maintained well?? IDK. Just me.. Worse case you will need 3 new diffs. offer a lower price. or pass. And not all 6s Denton parts are still available for it, Being discontinued some time ago. Probably Arrma replaced it with the Mojave when that happened. The time line and all. IMHO. The 6s Denton when new, wasn't that much more $$ back when. The extras may be worth It I don't know. I never consider Used Lipos as any great perk. Ones' I have not tried before and tested. If the lipos were sitting in the corner of a basement for a few years along with the rest of it, not regularly used or storage charged, they are probably garbage at this point.
$275.?

Maybe more like $175.-$190. Need better pix of the chassis and all.

In the end, it's your wallet to decide.

 

[Johnny b]

Agree with SrC. Can't clean up for photo shoot = probably not maintained. Personally wouldn't buy a used RC unless I knew the seller and his habits of maintenance. Just me.

 

[XplicitRC]

@SrC looks to be a bitter breakup item lol ... It's collected a bit of dust or just not cleaned / maintained. I have lipos but wasnt sure on charger and other accessories values. Haven't asked for more pics yet tomorrow I'll ask. There are some kraton 4s and 6s in way better shape for less but didn't know how sought after these were.

 

[MrTitanium]

Maintenance wasn’t done which means seller had no respect or knows the value of a dollar. Maybe a kid selling a gift his daddy bought him? Who knows. Either way, it looks like it needs a lot of TLC.

Offer $200 and see what he/she says.

 

[Bustedaw11]

Agree with SrC. Can't clean up for photo shoot = probably not maintained. Personally wouldn't buy a used RC unless I knew the seller and his habits of maintenance. Just me.

I agree. If I don't know someone I'm super wierd about spending much. Buying so many old rc over the years cheap I've seen some crazy stuff.

Stripped screws and blown diffs are all to common on used rc. Not everyone is competent with a screw driver or knows how to maintain diffs well. Bearings are usually shot also.

Save your pennies. Buy new. Best option. Used usually winds up costing the same as new would of anyway and in short time.

 

[SrC]

Agree with SrC. Can't clean up for photo shoot = probably not maintained. Personally wouldn't buy a used RC unless I knew the seller and his habits of maintenance. Just me.

I bought 2 used rigs from Members here. Great sellers. Who know how to wrench their stuff. As a rule I don't look for a used one, unless it is in my face, very special and I clearly see what I am getting. In person. More of an impulsive "have to buy" at the asking price, being so incredible. My son has one. His 6s V1 Infr.
I prefer to buy new with 2 yr warranty, and shop it hard getting a good discount. I'm patient about it.
And sometimes the Tree produces some Good Fruit. (@joostin420 )

 

[stevenwm]

Maybe I’m wrong but I think it’s a pretty good deal with all that’s included = Batteries /charger - 5 sets of wheels

And It’s the old blx electronics which many consider better then new spektrum stuff
The plastics look decent shape, doesn’t looked hammered to me
But to be honest I can’t see very good

If my purchase was covered, I’d respectfully offer 225 and see what happens

 

[slick2500]

That Denton there is old and filthy. Not how you sell an RC. So maybe you can assume it wasn't mechanically maintained well?? IDK. Just me.. Worse case you will need 3 new diffs. offer a lower price. or pass. And not all 6s Denton parts are still available for it, Being discontinued some time ago. Probably Arrma replaced it with the Mojave when that happened. The time line and all. IMHO. The 6s Denton when new, wasn't that much more $$ back when. The extras may be worth It I don't know. I never consider Used Lipos as any great perk. Ones' I have not tried before and tested. If the lipos were sitting in the corner of a basement for a few years along with the rest of it, not regularly used or storage charged, they are probably garbage at this point.
$275.?

Maybe more like $175.-$190. Need better pix of the chassis and all.

In the end, it's your wallet to decide.

You can buy every single part for the Senton 6s directly from Arrma except for the prepainted body and the rear wing, Amain has the rear wing in stock though. Senton 6s V3 was either $459.99 or $479.99.

 

[john 8s]

Low ball offer on it. Maybe will be accepted if they really want to get rid of it.

 

[XplicitRC]

There a "Kramton 4S" , Florida skools R TufF anyways that one is for sale as well for $300. V1 lightly used hardly no wear and tear, maybe that's a better deal and the availability of parts seems to be easily accessible still .. thanks for the replies fellas.

 

[Matt05]

Depends how far you have to go to get it. If it was a block away I’d be more interested than if I have to drive 45+ minutes. I don’t think it’s that bad of a deal, buying used you’re obviously going to go through the diffs. Bearings are cheap. Not the cleanest, but a little water and tire shine can hide a world of sin, so is it being dirty/dusty that big of a deal? How bad do you want a Senton 6s is the real question.

 

[XplicitRC]

Crazy thing is it's about 45 mins away . It looks to be shelved and collected a bit of dust too,hard to tell.maintence is a must 1st thing IF... I was honestly going to offer $200 and if all those tires aren't dry rotted either.i don't like playing the lottery on anything . I have a job out that way this week maybe will shoot an offer and see later on...

 

[blaster27]

I would not buy it. But you aren't me.

 

[slick2500]

There a "Kramton 4S" , Florida skools R TufF anyways that one is for sale as well for $300. V1 lightly used hardly no wear and tear, maybe that's a better deal and the availability of parts seems to be easily accessible still .. thanks for the replies fellas.

Kraton 4s V1 for $300 that is a hard pass.

Senton 6s parts are also easily accessible.

front shock tower https://www.arrma-rc.com/.../shock-tower.../ARAC9034.html
rear shock tower https://www.arrma-rc.com/.../shock-tower.../ARAC9018.html
front a arms https://www.arrma-rc.com/.../suspension.../ARAC9055.html
front upper a arms https://www.arrma-rc.com/.../suspension.../ARAC9056.html
rear a arms https://www.arrma-rc.com/.../suspension.../ARAC9057.html
front cv shafts https://www.arrma-rc.com/.../cvd-driveshaft.../ARAC3989.html
rear dog bones https://www.arrma-rc.com/.../dogbone-83.5mm-2/ARAC4040.html
body mount set https://www.arrma-rc.com/.../body-mount-set/ARAC3477.html
side guards https://www.arrma-rc.com/.../composite-side.../ARAC5019.html
front bumper set https://www.arrma-rc.com/.../bumper-set.../ARAC3483.html
front bumper plate set https://www.arrma-rc.com/.../bumper-plate.../ARAC3488.html
rear bumper https://www.arrma-rc.com/.../bumper-set.../ARAC3484.html
clear body https://www.arrma-rc.com/.../1-10-clear.../ARAC3408.html
front shock shafts https://www.arrma-rc.com/.../shock-shaft.../ARAC8980.html
front shock bodies https://www.arrma-rc.com/.../shock-body.../ARAC9069.html
front shock springs https://www.arrma-rc.com/.../shock-spring.../ARAC8941.html
rear shock shafts https://www.arrma-rc.com/.../shock-shaft.../ARAC8982.html
rear shock bodies https://www.arrma-rc.com/.../shock-body.../ARAC9071.html
rear shock springs https://www.arrma-rc.com/.../shock-spring.../ARAC8948.html
front turnbuckles https://www.arrma-rc.com/.../turnbuckle.../ARAC9386.html
rear camber links https://www.arrma-rc.com/.../turnbuckle.../ARAC9392.html
wheels and tires are on backorder https://www.arrma-rc.com/.../1-10-dboots.../ARAC9422.html
rear wing is on backorder https://www.arrma-rc.com/.../rear-wing-clear/ARAC9607.html
painted body is on backorder https://www.arrma-rc.com/.../1-7-painted.../ARAC3409.html

I am pretty sure those are all of the Senton specific parts which are for the most part all available directly from Arrma.

 

[Johnny b]

Kraton 4s V1 for $300 that is a hard pass.

Senton 6s parts are also easily accessible.

front shock tower https://www.arrma-rc.com/.../shock-tower.../ARAC9034.html
rear shock tower https://www.arrma-rc.com/.../shock-tower.../ARAC9018.html
front a arms https://www.arrma-rc.com/.../suspension.../ARAC9055.html
front upper a arms https://www.arrma-rc.com/.../suspension.../ARAC9056.html
rear a arms https://www.arrma-rc.com/.../suspension.../ARAC9057.html
front cv shafts https://www.arrma-rc.com/.../cvd-driveshaft.../ARAC3989.html
rear dog bones https://www.arrma-rc.com/.../dogbone-83.5mm-2/ARAC4040.html
body mount set https://www.arrma-rc.com/.../body-mount-set/ARAC3477.html
side guards https://www.arrma-rc.com/.../composite-side.../ARAC5019.html
front bumper set https://www.arrma-rc.com/.../bumper-set.../ARAC3483.html
front bumper plate set https://www.arrma-rc.com/.../bumper-plate.../ARAC3488.html
rear bumper https://www.arrma-rc.com/.../bumper-set.../ARAC3484.html
clear body https://www.arrma-rc.com/.../1-10-clear.../ARAC3408.html
front shock shafts https://www.arrma-rc.com/.../shock-shaft.../ARAC8980.html
front shock bodies https://www.arrma-rc.com/.../shock-body.../ARAC9069.html
front shock springs https://www.arrma-rc.com/.../shock-spring.../ARAC8941.html
rear shock shafts https://www.arrma-rc.com/.../shock-shaft.../ARAC8982.html
rear shock bodies https://www.arrma-rc.com/.../shock-body.../ARAC9071.html
rear shock springs https://www.arrma-rc.com/.../shock-spring.../ARAC8948.html
front turnbuckles https://www.arrma-rc.com/.../turnbuckle.../ARAC9386.html
rear camber links https://www.arrma-rc.com/.../turnbuckle.../ARAC9392.html
wheels and tires are on backorder https://www.arrma-rc.com/.../1-10-dboots.../ARAC9422.html
rear wing is on backorder https://www.arrma-rc.com/.../rear-wing-clear/ARAC9607.html
painted body is on backorder https://www.arrma-rc.com/.../1-7-painted.../ARAC3409.html

I am pretty sure those are all of the Senton specific parts which are for the most part all available directly from Arrma.

Good Lord your thorough!!! Take me like 5 days to post something half that long! Not gonna find that in a encyclopedia.

 

[slick2500]

Good Lord your thorough!!! Take me like 5 days to post something half that long! Not gonna find that in a encyclopedia.

I already had that list made up.

Short story long some tard on Bookface was trying to tell another guy that the Senton 6s was rare and that you couldn't get parts for them anywhere.

Me - "No they aren't really that rare as they were made for 5-6 years before Arrma discontinued them and you can still buy all of the parts new from Arrma. Now as far as finding them for sale yeah they are rare in that regard."

Him " Arrma doesn't sell all the parts..Only the parts that fit on other swb chassis"

Me - wanna bet and made that list.

Him - "Like I said Arrma only sells the parts that share with the Typhon..So yes, certain things you can still buy but other parts like nerf bars,bumpers ect you cant get anymore unless you find on ebay or something..Now some hobby shops still have all senton parts in stock but arrma is not producing more..Once the stock is bought up thats it"

Me - "I'm not trying to be an ass but all of the parts are clearly listed in that list and all of them are available to buy directly from Arrma. So just stop. Once you can actually show me a link from the Arrma website that says x part is discontinued then maybe your argument has some validity."

 

[Mr.Wizard24]

Senton 6s seems to be collecting dust and person selling doesn't seem to know much about it ... Worth the $275??
Apologize if this isn't the right thread pretty much everything on the shelf comes with it

View attachment 338995

View attachment 338996

View attachment 338998

I agree. Good deal if it runs. Bet you get her cleaned up and she be looking new.

 

[slick2500]

For anyone interested it will cost you approximately $460 to convert a Typhon into a Senton.