Felony The Hardbody 93 FoxBody Mustang Project!!

[nomis38]

Have you tried to print beyond the 500mm/s?

I went from slow to fast "BIQU to N4M"and I still complain lol...




Update on the chassis:
I wish I had some pizza cutters for the front. Gonna try and figure something out. I did put stock on the front and then 17mm hoons in the rear. I do still have some Felony rears too. It seems like I should be able to make all this crap fit on to this chassis with a bit of modding.

 

[King blitz]

With smart phones as good as they are what did you do to those pictures man

Yes you do need a 3d printer, everyone does honestly. It's literally a replicator

So you did what I have always wanted to do. A fox with turbo noises, its wrong in such a good way!!!



Here is a just a cheap little mock up. I'm super stoked and cant wait for the outcome. A proper RC Burnout car!!

View attachment 345825View attachment 345824View attachment 345823




I mean just look at it when its done!! I just wish the transition from file to real was faster haha.

View attachment 345826

Wow that looks unbelievable . But we have a issue looks like if ya want that motor to run you'll need a full belt ..yours is missing a big chunk

 

[Ron Burgandy]

Looks awsome!!!!!

 

[Tex Koder]

Wow that looks unbelievable . But we have a issue looks like if ya want that motor to run you'll need a full belt ..yours is missing a big chunk

Time to invest in some real belts..
Like repurpose those timing belts off of 3D printers!!
Make the crank and supercharger actually spin..

 

[King blitz]

Time to invest in some real belts..
Like repurpose those timing belts off of 3D printers!!
Make the crank and supercharger actually spin..

For a small scale model engine I think a small black elastic wouldn't look bad .if ya couldn't find any better

 

[Tex Koder]

For a small scale model engine I think a small black elastic wouldn't look bad .if ya couldn't find any better

Here are the belts I'm talking about..
(The Middle listing, those small belts on the lower right.)

 

[King blitz]

Some red spark plug wires would look sweet also a distributor cap wouldn't look bad neither

Here are the belts I'm talking about..
(The Middle listing, those small belts on the lower right.)

View attachment 345873

Those are pretty sweet
This reminds me a few years ago I bought a power steering belt for my sons car and I didn't have time to drop it in so I went and had some dirt bag mechanic put it in for me
I have him a gates belt ,which I payed good money for because gates is a great brand ,not some cheap crap from China and when I picked it up my sons car I opened the hood and noticed my belt wasn't in there but yeah some china 1.99 special lol .I was mofopissed .the fkin dude had my belt in his fkin truck .I asked him where was the gates belt and he said what gates belt ..that was the end of it I went off on that poor bastard and cops were called .almost got arrested but I did get the belt back qnd my money ..as for the mechanic i just shook him up a little im sure he was just fine

 

[nomis38]

Thats what most of my Heli's use...

But no the radiator covers it so i did not continue the belt system, I got enough on my plate lol.

 

[King blitz]

Thats what most of my Heli's use...

But no the radiator covers it so i did not continue the belt system, I got enough on my plate lol.

View attachment 345891View attachment 345890View attachment 345889

I think your next 3d printing project should be THE AIR WOLF HELICOPTER OH YEAH BABY MORE AND MORE MACHINE GUNS. LETS GO

 

[nomis38]

I think your next 3d printing project should be THE AIR WOLF HELICOPTER OH YEAH BABY MORE AND MORE MACHINE GUNS. LETS GO

That sounds awful man, my heli's are way to big and that thought makes my brain explode.

Well the print shifted.... This printing project is about to get whacky as i don't want to reprint so im gonna try chopping the file right where it f'ed up at. Lets see how this works out. "probably not well when it comes to lining them up and fusing them together after the print"

Also the bigger question... Why did it shift? It was still printing correctly and the print is still fully stuck to the bed. So the Bed shifted. Belt loose? Checked it and I cannot get it to skip a tooth on the belt...

3D Printing woes!!!

For all those that want to get into 3D printing just realize you need to fully understand the mechanics of the machine cause it will mess up, its all in when. Just give a read through my newest printers review. Some of these issue are enough to make a noob rage-quit. But in the end its just a small adjustment that needs made.

Review: Neptune 4 Max
https://www.arrmaforum.com/threads/elegoo-neptune-4-max.67841/

 

[King blitz]

That sounds awful man, my heli's are way to big and that thought makes my brain explode.


View attachment 345911




Well the print shifted.... This printing project is about to get whacky as i don't want to reprint so im gonna try chopping the file right where it f'ed up at. Lets see how this works out. "probably not well when it comes to lining them up and fusing them together after the print"

Also the bigger question... Why did it shift? It was still printing correctly and the print is still fully stuck to the bed. So the Bed shifted. Belt loose? Checked it and I cannot get it to skip a tooth on the belt...

3D Printing woes!!!

For all those that want to get into 3D printing just realize you need to fully understand the mechanics of the machine cause it will mess up, its all in when. Just give a read through my newest printers review. Some of these issue are enough to make a noob rage-quit. But in the end its just a small adjustment that needs made.

Review: Neptune 4 Max
https://www.arrmaforum.com/threads/elegoo-neptune-4-max.67841/

View attachment 345912

Just scale the Air wolf heli down a bit like to a 1/10 scale

 

[nomis38]

Just scale the Air wolf heli down a bit like to a 1/10 scale

Oh I thought since I showed Heli belts you meant to print an Airwolf canopy for one of my Heli's.

 

[King blitz]

Oh I thought since I showed Heli belts you meant to print an Airwolf canopy for one of my Heli's.

No way brotha that's huge lol.you ain't got no time for that lol.when your done with the supra and the mustang then if ya feel like it ,I think the Air wolf heli would be bass ass .I remember when I was like a little kid and right after dukes of hazard id watch air wolf .I used to take my G.I joe helicopter and make pretend it was Air wolf

 

[Tex Koder]

No way brotha that's huge lol.you ain't got no time for that lol.when your done with the supra and the mustang then if ya feel like it ,I think the Air wolf heli would be bass ass .I remember when I was like a little kid and right after dukes of hazard id watch air wolf .I used to take my G.I joe helicopter and make pretend it was Air wolf

It use to be there was an Action flick each day of the week!!

Knight Rider
A-Team
Riptide
Air Wolf
MacGyver
Street Hawk
Miami Vice

 

[Tex Koder]

Well the print shifted.... This printing project is about to get whacky as i don't want to reprint so im gonna try chopping the file right where it f'ed up at. Lets see how this works out. "probably not well when it comes to lining them up and fusing them together after the print"

Also the bigger question... Why did it shift? It was still printing correctly and the print is still fully stuck to the bed. So the Bed shifted. Belt loose? Checked it and I cannot get it to skip a tooth on the belt...

That definitely needs to be posted on the 3D Failed section..

Review: Neptune 4 Max
https://www.arrmaforum.com/threads/elegoo-neptune-4-max.67841/

View attachment 345912

I'm going to take a guess-
that it was probably due to some sort of corruption in the gcode.. at around that portion of of the part..

It's rare, but I've seen it happen.

3D Printing woes!!!

For all those that want to get into 3D printing just realize you need to fully understand the mechanics of the machine cause it will mess up, its all in when. Just give a read through my newest printers review. Some of these issue are enough to make a noob rage-quit. But in the end its just a small adjustment that needs made.

No Rage-Quitting is allowed here in this forum.
Just suck it up and keep printing.

 

[BruceRC]

No way brotha that's huge lol.you ain't got no time for that lol.when your done with the supra and the mustang then if ya feel like it ,I think the Air wolf heli would be bass ass .I remember when I was like a little kid and right after dukes of hazard id watch air wolf .I used to take my G.I joe helicopter and make pretend it was Air wolf

Loved Airwolf. I also loved this one:

 

[King blitz]

It use to be there was an Action flick each day of the week!!

Knight Rider
A-Team
Riptide
Air Wolf
MacGyver
Street Hawk
Miami Vice

Hell yeah . I watched all of them but don't know what rip tide is
Ooooh the A team van would look good on the vendetta chassis

Loved Airwolf. I also loved this one:

View attachment 345924

Never heard of it . maybe before my time.looks cool though

 

[nomis38]

Some progress has been made to the foxy. I have 4 days of work after today though. Printing will be happening but no assembly or finishing will be able to be done!!

Engine bay is printing now, then the rear quarter and finally she will be all done printing.

 

[nomis38]

Engine bay finished up. I forgot to remove the supports from the front of the radiator it looks like. Also, def going to need to make a full belt system as you can see it more than I thought after I shrunk the radiator size.

Final piece to the body is printing, Rear Quarter... WOOHOO!!!

 

[nomis38]

Well since you can fully see the belt due to the smaller radiator, I have done a belt system, with fan, alternator....

Its a lot of parts but it does make it all look better. I also went ahead and made a battery for it as well. Not sure I'll have space for the battery but what the hell why not.