Drtybird
Active Member
- Messages
- 386
- Reaction score
- 95
- Arrma RC's
I have been looking at cutting weight down on my katon and adding some strength. Has anyone converted the front and rear turnbuckles to titanium and aluminum rod ends? My searching and seeking info for parts and taking measurements has led me to this. The rear has to be made 4mm turnbuckle instead of 5mm with long rod ends. The front has the offset rod end and I'm going to be running rovac truck front wheels and tires, with the bigger wheels would I be able to run a straight rod end? And if there is any other suppliers that I might check