TooManyHobbies
Active Member
I haven't gotten a chance to get out and run my limitless yet as I want to wait til my reciever comes in to really open it up, but I figured that I might as well make a build log and update as I run it.
Parts list
-TP4070 CM 2200Kv motor w/ dual fans and heatsink.
-Hexfly Max6 equivalent ESC( May go Max5 in the future)
-R334SBS reciever in it at the moment, but I'm probably gonna wait for my R614FS to arrive so I can use the FASST protocol.
-Traxxas 330 servo(Replacing w/ Futaba ASAP)
-GRP S7's as I live in Texas, so it's hot and not the best roads.
-Delta Plastik Jag XRS body. I'm hoping the rear wheels don't rub the body. I used some gaffers tape to cover the high points at the rear of the body so air doesn't get trapped and slow the car down. Running no rear wing for now, may get something in the future.
-Front air dams to keep air out of the front of the body.
-Futaba GYC441 gyro, may or may not use it, but it's there.
-Ripple Killer 8S cap pack
-Futaba T7PXR Radio
-Infraction side skirts with body locks are on the way as well. I'm hoping they fit the body pretty well and keep even more air out of the body
I cut the super long front splitter down to just about even with the body and kept the body slightly longer than normal so when clipped in place, it seals against what's left of the splitter
With my current gearing, my estimated top speed according to RC Car GearCalc Android app is 199 MPH(Obviously nowhere near accurate as it doesn't account for any weight, road conditions, etc..)
I'll start off using a pair of SMC Racing 4S Graphene Extreme V2 120C batteries. May swap over to a single 160C 6S battery, we'll see.
Hopefully have an update soon with a GPS tracked run. If you've made it this far, you deserve an award for patience for reading all of that. Here's some pics as it sits
Parts list
-TP4070 CM 2200Kv motor w/ dual fans and heatsink.
-Hexfly Max6 equivalent ESC( May go Max5 in the future)
-R334SBS reciever in it at the moment, but I'm probably gonna wait for my R614FS to arrive so I can use the FASST protocol.
-Traxxas 330 servo(Replacing w/ Futaba ASAP)
-GRP S7's as I live in Texas, so it's hot and not the best roads.
-Delta Plastik Jag XRS body. I'm hoping the rear wheels don't rub the body. I used some gaffers tape to cover the high points at the rear of the body so air doesn't get trapped and slow the car down. Running no rear wing for now, may get something in the future.
-Front air dams to keep air out of the front of the body.
-Futaba GYC441 gyro, may or may not use it, but it's there.
-Ripple Killer 8S cap pack
-Futaba T7PXR Radio
-Infraction side skirts with body locks are on the way as well. I'm hoping they fit the body pretty well and keep even more air out of the body
I cut the super long front splitter down to just about even with the body and kept the body slightly longer than normal so when clipped in place, it seals against what's left of the splitter
With my current gearing, my estimated top speed according to RC Car GearCalc Android app is 199 MPH(Obviously nowhere near accurate as it doesn't account for any weight, road conditions, etc..)
I'll start off using a pair of SMC Racing 4S Graphene Extreme V2 120C batteries. May swap over to a single 160C 6S battery, we'll see.
Hopefully have an update soon with a GPS tracked run. If you've made it this far, you deserve an award for patience for reading all of that. Here's some pics as it sits