Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Just jought a new 6s battery. Plugged it in to the charger which instantly stated “reverse polarity” Does anyone know how to resolve this issue? Can I just turn the xt90 the orher way around?
Thanks!
That’s how it looks here too. The red wire is on the flat side. Maybe they messed up and wired it opposite on the battery.The positive red wire should be on the flat side and the negative black wire on the rounded side. Do not plug it into your ESC until you figure out the problem.
If the wires are on the right spots check to make sure you haven't plugged the banana plugs going into your charger backwards.
View attachment 176907
View attachment 176904
Try plugging another battery into your charger too see if you get the same message. If you don't get the reverse polarity warning then it's an issue with the battery. They may have just soldered the wires in wrong but if that's the case I wouldn't trust that battery. I would return it.That’s how it looks here too. The red wire is on the flat side. Maybe they messed up and wired it opposite on the battery.
All other batteries work fine on charger. It’s only this one. It looks good except for the polarityI doubt that can happen. Can you attach a pic?
Yeah that looks right. But if they made the mistake of reversing the wire, what other mistakes may have been made to the packAll other batteries work fine on charger. It’s only this one. It looks good except for the polarity
View attachment 176924
View attachment 176925
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!