granite

hey there, i'm new to the hobby and i'm about to buy a Granite 4x4 blx, so i'm looking for a 3s lipo, i read the lipo thread and saw some brand named to be good. but i've got a Question about the whole lipo thing. i know that current output of the batteries would be C-rating*capacity(assuming...

Hello, I designed, 3d printed and installed a pretty good roof protection for my Arrma Granite. I hope this may interest and help someone. It is thing:4808243. Here is the copy/past of the description: Summary This is a strong roof protection for the Arrma Granite that I designed for my car. I...

Hello everyone, Is there a decent brushless combo suitable for the granite 4x4 under $100? I've yet to find such one. The max 10 60A is more like $150 where I come from, so idk whether or not it's worth it. Any advice appreciated

I've been looking for a replacement ESC for my V3 Granite and I've found this Hobbywing system with almost twice the current of the mega ESC. My questions are: 1. How do you think the power will compare to the stock electronics? 2. Will the stock motor cut it or should I get something...

Hello everyone, I wanted to share with you a 3d printable Wing Mount I remixed specifically for the Arrma Granite 4x4 3S BLX v2. I think that it should work for other cars like Big Rock or other 3S line cars, but I can't be sure because I can't verify as I don't own those. Thanks a lot to the...

Arrma Granite 3s BLX 4x4 RC monster truck + pile of dirt + iPhone slo-mo = "Just Send it!"

Alright so, about a month ago, my Granite Mega ESC burst into flames after a month of use. I've been advised by many other forum members to try to get warranty on it. I did and they said they would fix it, but a month later, they refused to do anything about it. So now I'm back on square one...

Hey Arrma Forum, I'm new and this is my first post yay. Anyways I got my Arrma Granite 4x4 3s BLX 2 month ago and have ran it maybe twice a month since. So today I decided to take a look at the diffs and realized I needed a long skinny 2.0mm hex driver to unscrew the inner part of the...

Siberian Bash is harsh and does not tolerate weaklings!:D The recipe for a good bash: 1. Charged strong chassis; 2. Killaramp ramp; 3. The ambient temperature is no colder than 20 degrees (-25 'C in the video); 4. Sunny, windless weather; 5. A beautiful place.

Sorry in advance if this has already been answered.... Is the BLX slipper assembly (spur gear and all) a drop-in fit for the Mega V3? So if I buy the slipper/spur assembly, will I need anything else? (besides the correct pitch pinion).

I have a v3 senton and 2 granites a v2 with the blx from the senton in it cos I blew the diff will have pics the granite came with a sidewinder 3 and a 5700kv motor on 3s it over heats in 2 mins came with a a v1 granite roller I use for parts. My main question is what type of grease Should I get...

I have a stock granite 4x4 blx 3s. Is the ESC that comes on it “good”? Are there better ones? What would be the advantage/if any to upgrading it? thanks!

New to RC. Got Granite Mega V3. So much to learn and understand re maintenance and possible future upgrades. What are the best sources of basic maintenance/upgrade info that I could read/watch (apart from the manual) Don't feel like I want to bug you guys with the most basic of questions non...

Hi there We get about 1 battery worth of run out of our Arrma Granite before a wheel inevitably comes rolling off. It appears the tiny screw inside the drive shaft that holds the wheel axle in place unthreads itself repeatedly. Does anyone else have this problem and how can it be fixed?

Hey guys i currently have a granite 4x4 blx v3 and i recently broke my servo apparently 23 tooth servo upgrades are next to impossible to find ,so then i found a 25 tooth servo, another issue is the now i need a 25t servo saver and i can't find any in CANADA i found this one but it loooks like...

I've seen similar posts, but not exactly the info I am looking for (maybe I missed it). I am converting my Granite 4x4 Mega V3 to brushless... using ARRMA BLX100 ESC, GoolRC 3660 3800KV motor and 2s lipo... I know I need a new pinion for the 5mm shaft and plan on going with a 17t. My question...

Anyone have a good fix for supporting the body of a Granite or Big Rock internally? I've seen somewhere someone had an internal frame. After so many roof landings the body split in half on my BR and flattened out on my Granite. I ziptied the BR back together, and it actually looks kinda cool...

My son has the Arrma granite 4x4 brushed. Stock NiMH runs out quite quickly, so we got 2 spektrum 5000 2S LiPos. He ran it for too long I think on first day, (as he now has 13,300 mAh instead of 3,300...) and there was a definite smell. However it kept on running after that, and I explained...