suspension

How do you adjust the suspensions on the arrma senton 4x4?

I need to replace a front suspension arm on my arrma granite 4x4 but I can't figure out how to access the hinge pin to remove it. It looks like I need to remove the front skid plate but I can't seem to figure that out either. Anyone have any advice?

Hello As you probably know, the suspension on the Senton is held on by two screws. By the top one I had no problems taken the bolt of and than taking the suspension of. I didn't have to take the bottom screw off to take the suspenion out because the broken part is that small plastic ring at the...

I've been experiencing problems last week with the front suspension.. The car lays really low in the front, the suspension is weak.. The rear suspension works well. I already changed the springs for better ones (88gf/mm), changed the oil to 700. Checked if the arms moved up and down without...

It has finally happened, GPM Racing has released Aluminum Suspension arms for the Nero platform. It doesn't say what grade aluminum they used, but at least they are an option now. I have been looking for these since the day I received my Big Rock, 8 months ago. Within 20 minutes on my first...

RPM RC Products is delivering again - this time with front upper and lower a-arms for the Arrma Kraton, Outcast, and Talion RC's. Oh the A-Arms also fit the Durango DEX8T :D Made from the well known nylon blend. RPM has also made a few changes of their own over the stock Arrma A-arms such as...

My kraton is v2 is way too soft in front and too stiff in back. I have 70wt oil in all shocks and the dampening has improved, but with a squishy front and stiff rear it's hard to leave the face of a jump without a nose-down attitude. My question is: what shock spring upgrades would you...

I thought that it would be a good idea to create a thread for the nero's suspension setup for various types of driving (i.e. Big jumps, small jumps, on road, bumpy terrain, etc). I personally run with 60 wt and a little 60k diff oil with 2 hole pistons drilled out with a 1/16 inch drill bit. I...

I keep breaking my upper suspension mount without even crashing any suggestions on why and does the aluminum durango truggy one fit thanks for any help

whats all different with the suspension? Does it just have longer push rods? bigger rockers? Longer shocks? Looking to give my Nero more suspension travel.

I just got the raider xl mega brushed, I also installed the Velineon VXL-3s. I'm lookin to beef up the tranny and suspension, this buggy is only gonna do speed runs any ideas for tranny and suspension ??

Hello, the front left shock on my Granite BLX just started leaking oil. I haven't done any jumps and also didn't drive it for 3 days. Before I put it safely in the box I checked it and it was perfectly fine. Now I take it out and part of the box is soaked with oil. How could this happen and what...

Since i started off as a roller i figured i would show you what i got going on under the hood. This Arrma Senton is powered by a mamba monster and 2200kv motor with a 18t pinion, ESC and motor fan powered through a 5amp bec. I used a Traxxas esc mount to hold it down. Steering has a power HD...

Im very dissapointed with the lower front arms durability in my Senton! I also try to buy replacements from various online hobby shops and they're out of stock everywhere. Anybody else confronting the same issue?

So it seems that even for how beefy the parts are on the Senton the stock plastics just aren't holding up so well to a good bashing. I read today somewhere on Facebook that RPM RC may be making some parts for Arrma soon but it didn't say for what trucks or when. I'm really hopeful they do the...