- Thread starter
- #21
I made an offer of 100 and they accepted, but still .....Wow the finish on that is awful considering the cost.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I made an offer of 100 and they accepted, but still .....Wow the finish on that is awful considering the cost.
Looks like he polished it with gravel ?Wow the finish on that is awful considering the cost.
Wow that's not as bad but still, those $120 Redcat/Exceed/HSP brushed rcs come with a nicer finish than that.I made an offer of 100 and they accepted, but still .....
Nothing like a 20lb 1/8 scale rig ?
I just nosed mine trying to clear a triple bashing my local track, battery came unplugged, but still straight as an arrow. ?I have done some terrible things with my M2C chassis and it's as straight as the day I put it on.
Or into a kid’s backbone ??If they're willing to deceive customers with those pics I'd be wondering if it really was 7075 T6. Just tell them you want your money back and they can take the POS.
...into your shin at 40+ mph.
Or into a kid’s backbone ??
This is version #1 and trying to coordinate >2 local vendors to make a part that meets my specs is easier said than done. Thanks for the feedback though.That designer is beyond stupid!
He made the gear notches with a rounded edge.. And so it got bigger.. And to big for the diff case to fit over it.. If he just made the notch with square corners.. The problem wasnt goin ro be there..
Did you just send them an M2C chassis and say "make this, but thicker."?This is version #1 and trying to coordinate >2 local vendors to make a part that meets my specs is easier said than done. Thanks for the feedback though.
Did you just send them an M2C chassis and say "make this, but thicker."?
It weighs 1.9lbs, what would you have a gas powered engine in it? ???Nothing like a 20lb 1/8 scale rig ?
The green New deal will power it LOLIt weighs 1.9lbs, what would you have a gas powered engine in it? ???
I'm putting a Max 5 in it and starting out with a 4092 motor 1480kvThe green New deal will power it LOL
That's what I did 1730kv 4092 hobbystar with a Max5. It rips and no diff issues yet!The green New deal will power it LOL
I'm putting a Max 5 in it and starting out with a 4092 motor 1480kv
Anyone with eyesight can see it doesn't surpass the quality of M2C or JBI ?What I want to know is how can it be claimed on the Ebay listing that these surpass the quality of M2C and JBI and the notches for the Diffs are too big? That combined with the fact, as mentioned before, the finish looks like it comes pre-bashed and that claim becomes an outright lie.
I'd be curious to see that material data sheet too.
What post it on this thread? Get a life guyWhat I want to know is how can it be claimed on the Ebay listing that these surpass the quality of M2C and JBI and the notches for the Diffs are too big? That combined with the fact, as mentioned before, the finish looks like it comes pre-bashed and that claim becomes an outright lie.
I'd be curious to see that material data sheet too.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!