E36Mtek
Member
- Messages
- 16
- Reaction score
- 106
- Arrma RC's
- Talion
- 4x4-Mega
And yes they did fit directly no mods requiredOkay, will do...thanks for the tip! Lousy eBay contact link isn't working...argh!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
And yes they did fit directly no mods requiredOkay, will do...thanks for the tip! Lousy eBay contact link isn't working...argh!
https://m.ebay.com/itm/4-BIG-BORE-A...rentrq:013593831640aad90fd324b8ffecd663|iid:1Okay, will do...thanks for the tip! Lousy eBay contact link isn't working...argh!
Here is the link those are not the ones tho just contact the seller from there should work
Thanks, I sent a message.Here is the link those are not the ones tho just contact the seller from there should work
I think they are about the same maybe a little stiffer. I have mines adjusted not even half way and the truck is as high as it can go and in runing 70w oil. I know that’s a little too thick but I like how it rides@E36Mtek Are the spring rates on these shocks roughly the same? I guess the pre-load can be adjusted to deal with ride height issues...
I think they are about the same maybe a little stiffer. I have mines adjusted not even half way and the truck is as high as it can go and in runing 70w oil. I know that’s a little too thick but I like how it rides
EmptyThanks for the feedback. Did they come pre-filled or empty?
That’s awesome. I haven’t had any problems yet with them and I have broken the truck a few times already lol right now I’m waiting on drive shafts, and the last time I broke the control arm and the shock was the only think holding the tire to the truck. Still had no problemsI'm going to pickup my shocks today. The seller was fast, even with free shipping. I had them sent to an NY address, so it is close by I guess. I can't wait to try them out.
How did those shocks work out? What length front & rear did you get?I'm going to pickup my shocks today. The seller was fast, even with free shipping. I had them sent to an NY address, so it is close by I guess. I can't wait to try them out.
I haven't filled them yet, I'm waiting for a breakage to justify doing all the screws. I was contemplating doing just the fronts and leaving the rears stock since they aren't that vulnerable. They are 110 mm front and 123 mm rear, so slightly less travel on the rear.How did those shocks work out? What length front & rear did you get?
man what are u guy's hitting
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!