Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It was Rates 125% I go up 150% in dx5 no change may be I not calibrating Right? If you know how to calibrate let me know. ThanksYou want to set the end point adjustments in your radio with the tires off the ground.
It was Rates 125% I go up 150% in dx5 no change may be I not calibrating Right? If you know how to calibrate let me know. Thanks
The manual states you have to rebind after making any changes. Is that true? or can you set the EPA without a rebind?
In the DX5 ?
Yes, I resolve the problem thanks for your help
Bind the dx5 with the receiver
Thanks this was the problemIf the RX is/was already bound to the TX you shouldn't have to rebind anything when you change out a servo. At least none of my $400 Futaba's do.. I don't run spektrum though..
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!