- Messages
- 1,628
- Reaction score
- 1,915
- Location
- Australia
- Arrma RC's
- BigRock 4x4
- Infraction
- Kraton 8S
- Kraton 6s
- Talion
- Typhon 6s
I've been trying to work out what I'm going to do with my old v3 Kraton, it's over a year old, it's always been maintained, but was starting to get tired. I started ordering parts a few weeks ago for it. They started arriving last week and now that my esc died I thought I better go all out, so here is the canvas.
So the first few things I've done is rebuilt the three diffs, shimmed and new cases. I've replaced the front end, new knuckles and rpm a-arms. I had to replace the radio tray and battery tray after a heavy impact a few weeks ago.
A few things I'd done a while ago are, Voltage Hobbies towers, servo mount and steering rack, GKA chassis braces and rear hinge pin braces. RPM steering rod ends, Tekno shock rod ends and balls.
The next big thing I've got going in is this...
My only reservation is having to remove the rpm wing mount and the shock towers, apparently they have to be stock for it to fit without modification.
I've decided to make a fortified bash vehicle, so it's going to be heavy duty.
So the first few things I've done is rebuilt the three diffs, shimmed and new cases. I've replaced the front end, new knuckles and rpm a-arms. I had to replace the radio tray and battery tray after a heavy impact a few weeks ago.
A few things I'd done a while ago are, Voltage Hobbies towers, servo mount and steering rack, GKA chassis braces and rear hinge pin braces. RPM steering rod ends, Tekno shock rod ends and balls.
The next big thing I've got going in is this...
My only reservation is having to remove the rpm wing mount and the shock towers, apparently they have to be stock for it to fit without modification.
I've decided to make a fortified bash vehicle, so it's going to be heavy duty.
Last edited: