- Messages
- 471
- Reaction score
- 645
- Arrma RC's
- Granite
- Notorious
I got rubber sealed bearings on everything in my Granite. I have the ARRMA metal ring and input but I don't have the HR yokes tho.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You should play the lottery brother! I've never seen that bearing blown before!Man… I had trouble putting this metal diff together. First time together it wouldn’t spin. So I took it apart, drained it and realized I’d forgotten one of the shims on top of the o-ring. I put it back together with new oil and it spun, then clicked and stopped.
So I took it apart again and drained the oil. After a while I figured out that little tiny bearing between the output drives had fallen apart. Yup, I’m using internals from a used diff. I pulled it out, replaced it and put it back together. It spun nicely so I put the bearings on, installed it in the hot racing yolk, put the axles on then spun it one more time… click click then it jammed. At this point I looked closely at the little tiny bearing I’d pulled out and realized I didn’t get all of it. Like all the little stupid balls part of it.
So I pulled the differential apart, drained all of the new oil, completely cleaned everything and inspected it closely. I got it back together with new oil and it’s perfect now. I just finished putting back together the Vorteks Thing and can’t wait to test it tomorrow. Metal spur, CVDs and metal differential. Now I can finish fixing the Noto so I can finally open the new Kraton
View attachment 215560
View attachment 215561
View attachment 215562
View attachment 215563
Yeah but that teeny tiny bearing snugged between the outdrive gears inside the differential…that is metal shielded and the one I had issues with.I got rubber sealed bearings on everything in my Granite. I have the ARRMA metal ring and input but I don't have the HR yokes tho.
This is the example I was thinking of in that post. In my brilliance I put the paint can that was already close to 90° In an even hotter cup of hot water. That’s where the spluttering came from I’m sure because when I stop doing that so did the sputtering.Looks great, looking forward to the final stages.
Yup, made said request and am waiting patiently. I like having AF stickers on all my carsif he has any Woodie will usually send you some if you pm him your address and ask for some!
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!