What did you work on today?

[Pat_ranch]

Converted a couple speedies into treats

I'm definitely out of practice- took almost 7 hours to get 2 of em into the freezer.

 

[The_Otherside]

Cleaned the living room floor by hand...

Still 2 other rooms and upstairs.

 

[y noT]

Getting debris out of the typhon 3s and adding the 20 tooth pinion.

 

[Pat_ranch]

Bonding at 8k ft

 

[The_Otherside]

Started making arcade sticks/hitboxes again.

 

[jkflow]

Perfecting the art of making rainbows

 

[Sandracer_NL]

Slowly getting there. Today working on making (DIY) new front (dirt) guards to attach to the side guards.

 

[Warby]

Worked in this heat. Its only the start of the hot season too.

Below in Celsius

 

[Edough13]

Got 6.5 bullets soldered on the 150A in the Bigrock for the new Hobbystar 4068 2400kv going in. Also soldered up a QS8 loop for the XLX2 in the Limitless.

 

[The_Otherside]

Almost done.

 

[Boggs3010]

Added aluminum control arms to my Infraction. Would not recommend btw. Getting the pillow ball screws to go in was a nightmare. Way to tight had to hammer them open with a wedge marking the metal. And still stripped 2 balls , luckily I had spares . 3 hours to get them on . I checked there all made this way.

 

[Pat_ranch]

Built a fire

It was windy, so I had to use extra rocks

 

[Doom!]

@Pat_ranch and a mighty fine fire it is, did you rub sticks together to start it?

 

[Pat_ranch]

@Pat_ranch and a mighty fine fire it is, did you rub sticks together to start it?

I rolled the little striker wheel on the bic under some beetle killed pine needles- crackle crackle WOOF! That stuff burns quick!

 

[Slim64684]

started figuring out a more compact storage solution.

 

[N.Mango]

Tried to straighten the bent wing mount on my Kraton and also the wing that cracked so I can run it without it looking crippled until my new parts arrive.

 

[Just Joe]

Cowboy Cadillac
Found some horns in the bag of spare parts that came with the Scx10ii… So on the Big Rock they went

 

[parcou]

Fam

I just took the Kraton out of the box yesterday. It is still a roller but I wanted to see what the PL Armor body would look like since that this will be my dirt basher body and the EXB body as my shelf queen. Making the holes was a pain as someone posted I needed to drill new holes to go in the opposite direction for the front body pins. I know I should be working on the electronics install but knowing the look helps keep me motivated. The T-bone bumper looks cool as well. Lov'in the smaller dang wing!

I know it's nothing fancy seen one Kraton seen them all... I am not on Memphis Beale Street tonight at the BB King spot...so the "thrill is NOT gone" for me just yet

 

[Doom!]

Fam

I just took the Kraton out of the box yesterday. It is still a roller but I wanted to see what the PL Armor body would look like since that this will be my dirt basher body and the EXB body as my shelf queen. Making the holes was a pain as someone posted I needed to drill new holes to go in the opposite direction for the front body pins. I know I should be working on the electronics install but knowing the look helps keep me motivated. The T-bone bumper looks cool as well. Lov'in the smaller dang wing!

I know it's nothing fancy seen one Kraton seen them all... I am not on Memphis Beale Street tonight at the BB King spot...so the "thrill is NOT gone" for me just yet

She's lookin' mighty fine!

 

[N.Mango]

Mocking up new mud guards to go with the new tires on the Kraton. And cleaned the already clean shelf queen Lasernut. Yes I said shelf queen. But she does love to taste dirt every now and then. Hate when she flips over....$60 for a couple pieces of panels!!!