slick2500
Anything will break if you drive it wrong enough.
Community Leader
Premium Member
ArrmaForum Fan
Excellence Award
Build Thread Contributor
- Messages
- 26,773
- Reaction score
- 42,318
- Location
- Rapid City, SD
- Arrma RC's
- Fireteam
- Kraton 6s
- Kraton EXB
- Outcast 6s
- Senton 3s
- Typhon 3s
Saturday I went up to the LHS to pick up some paint for one of my bodies and ended up walking out with an Axial SCX24 1967 Chevy.
Everything that was in the box sans packaging.
Included transmitter is the Axial AX-4 2.4ghz radio. It uses 4 AA batteries(that are included)
Simple controls. The low medium high switch actually functions.
Little baggy with the light bar in it.
A usb balance plug charger.
The manual, some spare parts and the 4 AA batteries.
Body off shot and the 2 in 1 AE-6 esc/rx.
The included 350mah 2s lipo.
Tiny little motor.
Light bar all installed.
All of the screws are SAE.
I had to trim the front fenders as the tires kept hitting.
Shocks are not good.
Going to install the Hot Racing shocks, brass diff covers, brass front knuckles and the brass wheel weights.
Everything that was in the box sans packaging.
Included transmitter is the Axial AX-4 2.4ghz radio. It uses 4 AA batteries(that are included)
Simple controls. The low medium high switch actually functions.
Little baggy with the light bar in it.
A usb balance plug charger.
The manual, some spare parts and the 4 AA batteries.
Body off shot and the 2 in 1 AE-6 esc/rx.
The included 350mah 2s lipo.
Tiny little motor.
Light bar all installed.
All of the screws are SAE.
I had to trim the front fenders as the tires kept hitting.
Shocks are not good.
Going to install the Hot Racing shocks, brass diff covers, brass front knuckles and the brass wheel weights.
Last edited: